Had the same issue and this is how to sort it out press the SHIFT + INFO button on your remote control then press the P+ and P- button down together on your decoder and a pop up screen would appear on your television screen showing the UHF channel and frequency. When the screen appears kindly press the EXIT button on your remote control then confirm if all is well. On Jan 13, 2014 12:05 PM, "Edwin Nguku" <edwinnguku@gmail.com> wrote:

Hey Jayden,

I have also experienced the same issue on a friend's decoder i was setting up. To fix it simply press both P+ and P- buttons on the decoder and a screen should show up then press exit button on the remote and that should fix it.

If the issue of getting stuck keeps recurring simply do a reset of the decoder form the advanced settings and i think that should sort it out once and for all.

Regards,

Edwin On Jan 13, 2014 11:52 AM, "Jayden Brayden" <jaybrayden@gmail.com> wrote:

...

Hi all,

I recently joined the mad rush to own a GoTV decoder.

However, mine is now stuck on only one channel i.e. CNN. The remote control is not responding, and neither are the buttons on the decoder itself.

Has anyone else experienced this issue before? It seems it is common with GoTV. I will not mind looking for an alternative decoder.

Thanks.

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

Na Wash amekuwa jeuri sana siku hizi ... On Monday, 13 January 2014, Odhiambo Washington wrote:

Ignore everyone and call GoTV. They will tell you the correct thing to do. I once had my kid play with the RC and then it got stuck - like was not controlling the decoder at all. There is a simple combo to press on the RC (not on the decoder) and it works normally again.

If you do not have someone to call, you can call this guy - Sam - 0723 519817

On 13 January 2014 13:53, William kibe <njoroge.kibe@gmail.com<javascript:_e({}, 'cvml', 'njoroge.kibe@gmail.com');>

...

wrote:

...

Had the same issue and this is how to sort it out press the SHIFT + INFO button on your remote control then press the P+ and P- button down together on your decoder and a pop up screen would appear on your television screen showing the UHF channel and frequency. When the screen appears kindly press the EXIT button on your remote control then confirm if all is well. On Jan 13, 2014 12:05 PM, "Edwin Nguku" <edwinnguku@gmail.com<javascript:_e({}, 'cvml', 'edwinnguku@gmail.com');>> wrote:

...

Hey Jayden,

I have also experienced the same issue on a friend's decoder i was setting up. To fix it simply press both P+ and P- buttons on the decoder and a screen should show up then press exit button on the remote and that should fix it.

If the issue of getting stuck keeps recurring simply do a reset of the decoder form the advanced settings and i think that should sort it out once and for all.

Regards,

Edwin On Jan 13, 2014 11:52 AM, "Jayden Brayden" <jaybrayden@gmail.com<javascript:_e({}, 'cvml', 'jaybrayden@gmail.com');>> wrote:

...

Hi all,

I recently joined the mad rush to own a GoTV decoder.

However, mine is now stuck on only one channel i.e. CNN. The remote control is not responding, and neither are the buttons on the decoder itself.

Has anyone else experienced this issue before? It seems it is common with GoTV. I will not mind looking for an alternative decoder.

Thanks.

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke <javascript:_e({}, 'cvml', 'skunkworks@lists.my.co.ke');> ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke <javascript:_e({}, 'cvml', 'skunkworks@lists.my.co.ke');> ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke <javascript:_e({}, 'cvml', 'skunkworks@lists.my.co.ke');> ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

-- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 "I can't hear you -- I'm using the scrambler."

-- with Regards: blog.denniskioko.com <http://www.denniskioko.com/>

Not sure what i did mine but went through  the menu until i got an option of  reset settings and restart the decoder and it worked The call center took me in circles until they told me to take the decoder to their service center On Monday, 13 January 2014, 14:39, Dennis Kioko <dmbuvi@gmail.com> wrote: Na Wash amekuwa jeuri sana siku hizi ... On Monday, 13 January 2014, Odhiambo Washington wrote: Ignore everyone and call GoTV. They will tell you the correct thing to do. I once had my kid play with the RC and then it got stuck - like was not controlling the decoder at all. There is a simple combo to press on the RC (not on the decoder) and it works normally again.

If you do not have someone to call, you can call this guy - Sam - 0723 519817

On 13 January 2014 13:53, William kibe <njoroge.kibe@gmail.com> wrote:

Had the same issue and this is how to sort it out

...

press the SHIFT + INFO button on your remote control then press the P+ and P- button down together on your decoder and a pop up screen would appear on your television screen showing the UHF channel and frequency. When the screen appears kindly press the EXIT button on your remote control then confirm if all is well. On Jan 13, 2014 12:05 PM, "Edwin Nguku" <edwinnguku@gmail.com> wrote:

Hey Jayden,

...

I have also experienced the same issue on a friend's decoder i was setting up. To fix it simply press both P+ and P- buttons on the decoder  and a screen should show up then press exit button on the remote and that should fix it. If the issue of getting stuck keeps recurring simply do a reset of the decoder form the advanced settings and i think that should sort it out once and for all. Regards, Edwin On Jan 13, 2014 11:52 AM, "Jayden Brayden" <jaybrayden@gmail.com> wrote:

Hi all,

...

I recently joined the mad rush to own a GoTV decoder.

However, mine is now stuck on only one channel i.e. CNN. The remote control is not responding, and neither are the buttons on the decoder itself.

Has anyone else experienced this issue before? It seems it is common with GoTV. I will not mind looking for an alternative decoder.

Thanks.

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

_______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke ------------ List info, subscribe/unsubscribe http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------

Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke

-- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 "I can't hear you -- I'm using the scrambler."

-- with Regards: blog.denniskioko.com _______________________________________________ skunkworks mailing list skunkworks@lists.my.co.ke ------------ List info, subscribe/unsubscribe http://orion.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke