OK, ive googled and done all crazies, then i figured, since i bought it in this market, most probably some of you have encountered this. My card is based on the philips SA7130 chipset and im running it on ubuntu. card gets detected, i even see video but audio is not there. when i change to other inputs (S1 and 2) i hear sound and not TV. its like my card is capturing tv fine and then capturing audio on a different device. -- Regards, Collins Areba. *Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
Connect the tv audio out to your computer audio in using the audio Jack that comes with the tv card. This should work. Else, You could also try: rmmod saa7134; modprobe saa7134 card=86 tuner=81 Then try watching tv again with mplayer.. mplayer tv://23 (That's kbc for you, a sure hit). I suggest trouble shooting with mplayer because i have been driven insane by tvtime several times before :-). It just isn't documented well enough. -- Ndungi On Oct 23, 2010 6:49 PM, "[ Brainiac ]" <arebacollins@gmail.com> wrote: OK, ive googled and done all crazies, then i figured, since i bought it in this market, most probably some of you have encountered this. My card is based on the philips SA7130 chipset and im running it on ubuntu. card gets detected, i even see video but audio is not there. when i change to other inputs (S1 and 2) i hear sound and not TV. its like my card is capturing tv fine and then capturing audio on a different device. -- Regards, Collins Areba. *Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins ** _______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes... areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound. On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio out to your computer audio in using the audio Jack that comes with the tv card. This should work. Else, You could also try: rmmod saa7134; modprobe saa7134 card=86 tuner=81
Then try watching tv again with mplayer..
mplayer tv://23
(That's kbc for you, a sure hit). I suggest trouble shooting with mplayer because i have been driven insane by tvtime several times before :-). It just isn't documented well enough.
-- Ndungi
On Oct 23, 2010 6:49 PM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
OK, ive googled and done all crazies, then i figured, since i bought it in this market, most probably some of you have encountered this. My card is based on the philips SA7130 chipset and im running it on ubuntu. card gets detected, i even see video but audio is not there. when i change to other inputs (S1 and 2) i hear sound and not TV. its like my card is capturing tv fine and then capturing audio on a different device.
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards, Collins Areba. *Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best! On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote: nothing seems to work after the first two: in fact tvtime now just flickers on and then goes... areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound. On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output [103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x I haveAm trying to scan for channels using w-scan without any success On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best!
On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes...
areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound.
On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Lusiola Brian |3 R 1 /-\ |\|
Good morning Brian, Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ? On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best!
On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes...
areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound.
On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best!
On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes...
areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound.
On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance. Kind regards, -- Lusiola Brian |3 R 1 /-\ |\|
Hi Brian, Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ? On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best!
On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes...
areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound.
On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
@ brian where can I get the dvb usb dongle? are they available locally? On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best!
On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes...
areba@areba-desktop:~$ rmmod saa7134
ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ sudo rmmod saa7134 [sudo] password for areba: ERROR: Module saa7134 is in use by saa7134_alsa areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release. areba@areba-desktop:~$ tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/home/areba/.tvtime/tvtime.xml" I/O error : Permission denied I/O error : Permission denied Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission denied. cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, stepping 9. cpuinfo: CPU measured at 2658.094MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :1.0, vendor The X.Org Foundation, vendor release 10900000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1024x768. xcommon: Have XTest, will use it to ping the screensaver.
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound.
On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards, Mark Mwangi http://mwangy.posterous.com Skype : mark.mwangy
im imagining that the DVB card is used in place of a Decoder fr F2A channels.... right ? On Mon, Oct 25, 2010 at 11:43 AM, Mark Mwangi <mwangy@gmail.com> wrote:
@ brian where can I get the dvb usb dongle? are they available locally?
On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
Try rmmod-ing saa7134 _alsa too, or any other dependent module until rmmod saa7134 succeeds silently. Only then can you say you've reloaded the driver with the correct options. Also fungua alsa-mixer and raise the line and 3d volume just to b sure.. all the best!
On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> wrote:
nothing seems to work after the first two: in fact tvtime now just flickers on and then goes...
areba@areba-desktop:~$ rmmod saa7134 > ERROR: Module saa7134 is in use by saa7134_alsa > areba@areba-desktop:~$ sudo rmmod saa7134 > [sudo] password for areba: > ERROR: Module saa7134 is in use by saa7134_alsa > areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 > WARNING: All config files need .conf: /etc/modprobe.d/options, it > will be ignored in a future release. > areba@areba-desktop:~$ tvtime > Running tvtime 1.0.2. > Reading configuration from /etc/tvtime/tvtime.xml > I/O warning : failed to load external entity > "/home/areba/.tvtime/tvtime.xml" > I/O error : Permission denied > I/O error : Permission denied > Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission > denied. > cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, > stepping 9. > cpuinfo: CPU measured at 2658.094MHz. > tvtime: Cannot set priority to -10: Permission denied. > xcommon: Display :1.0, vendor The X.Org Foundation, vendor release > 10900000 > xfullscreen: Using XINERAMA for dual-head information. > xfullscreen: Pixels are square. > xfullscreen: Number of displays is 1. > xfullscreen: Head 0 at 0,0 with size 1024x768. > xcommon: Have XTest, will use it to ping the screensaver. > >
on the mplayer, i installed and ran as indicated. I got video all right (citizen actually), but no sound.
On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> wrote: > > Connect the tv audio o...
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Mark Mwangi
Skype : mark.mwangy
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards, Collins Areba. *Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
On Mon, Oct 25, 2010 at 1:14 PM, [ Brainiac ] <arebacollins@gmail.com>wrote:
im imagining that the DVB card is used in place of a Decoder fr F2A channels.... right ?
On Mon, Oct 25, 2010 at 11:43 AM, Mark Mwangi <mwangy@gmail.com> wrote:
@ brian where can I get the dvb usb dongle? are they available locally?
On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
> Try rmmod-ing saa7134 _alsa too, or any other dependent module until > rmmod saa7134 succeeds silently. Only then can you say you've reloaded the > driver with the correct options. Also fungua alsa-mixer and raise the line > and 3d volume just to b sure.. all the best! > > On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> > wrote: > > nothing seems to work after the first two: in fact tvtime now just > flickers on and then goes... > > areba@areba-desktop:~$ rmmod saa7134 >> ERROR: Module saa7134 is in use by saa7134_alsa >> areba@areba-desktop:~$ sudo rmmod saa7134 >> [sudo] password for areba: >> ERROR: Module saa7134 is in use by saa7134_alsa >> areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 >> WARNING: All config files need .conf: /etc/modprobe.d/options, it >> will be ignored in a future release. >> areba@areba-desktop:~$ tvtime >> Running tvtime 1.0.2. >> Reading configuration from /etc/tvtime/tvtime.xml >> I/O warning : failed to load external entity >> "/home/areba/.tvtime/tvtime.xml" >> I/O error : Permission denied >> I/O error : Permission denied >> Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission >> denied. >> cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, >> stepping 9. >> cpuinfo: CPU measured at 2658.094MHz. >> tvtime: Cannot set priority to -10: Permission denied. >> xcommon: Display :1.0, vendor The X.Org Foundation, vendor release >> 10900000 >> xfullscreen: Using XINERAMA for dual-head information. >> xfullscreen: Pixels are square. >> xfullscreen: Number of displays is 1. >> xfullscreen: Head 0 at 0,0 with size 1024x768. >> xcommon: Have XTest, will use it to ping the screensaver. >> >> > > on the mplayer, i installed and ran as indicated. I got video all > right (citizen actually), but no sound. > > > > > > On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> > wrote: > > > > Connect the tv audio o... > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke >
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Mark Mwangi
Skype : mark.mwangy
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
@ Mark. I got mine through unified-concepts <http://www.unified-concepts.co.ke>. Please contact them as I am not sure on what they have in stock. @Ndungi I don't have the channel list of my own memory, I had to remove Micro$oft, I can get you a full channel list that is available later. @Brainiac Nime float. ??? [?] Hiyo ni nini? All I have is a DVB-T usb receiver. Trying to do some research for work :D -- Lusiola Brian |3 R 1 /-\ |\|
Brainiac, Any success with audio? On 25 October 2010 10:45, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 1:14 PM, [ Brainiac ] <arebacollins@gmail.com>wrote:
im imagining that the DVB card is used in place of a Decoder fr F2A channels.... right ?
On Mon, Oct 25, 2010 at 11:43 AM, Mark Mwangi <mwangy@gmail.com> wrote:
@ brian where can I get the dvb usb dongle? are they available locally?
On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
> <Hijack> > Goodmorning Ndungi, > I have a DTV usb dongle. > Here is my dmesg output > > [103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed > interval: 16 -> 8 > [103982.672522] input: Afatech DVB-T 2 as > /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 > [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB > HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 > [103983.008382] AF901X: af901x_module_init > [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in > warm state. > [103984.202858] dvb-usb: will pass the complete MPEG2 transport > stream to the software demuxer. > [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T > Recevier) > [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB > DVB-T)... > [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully > initialized and connected. > [103984.207975] usbcore: registered new interface driver > dvb_usb_af901x > > I haveAm trying to scan for channels using w-scan without any success > > > On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com>wrote: > >> Try rmmod-ing saa7134 _alsa too, or any other dependent module until >> rmmod saa7134 succeeds silently. Only then can you say you've reloaded the >> driver with the correct options. Also fungua alsa-mixer and raise the line >> and 3d volume just to b sure.. all the best! >> >> On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> >> wrote: >> >> nothing seems to work after the first two: in fact tvtime now just >> flickers on and then goes... >> >> areba@areba-desktop:~$ rmmod saa7134 >>> ERROR: Module saa7134 is in use by saa7134_alsa >>> areba@areba-desktop:~$ sudo rmmod saa7134 >>> [sudo] password for areba: >>> ERROR: Module saa7134 is in use by saa7134_alsa >>> areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 >>> WARNING: All config files need .conf: /etc/modprobe.d/options, it >>> will be ignored in a future release. >>> areba@areba-desktop:~$ tvtime >>> Running tvtime 1.0.2. >>> Reading configuration from /etc/tvtime/tvtime.xml >>> I/O warning : failed to load external entity >>> "/home/areba/.tvtime/tvtime.xml" >>> I/O error : Permission denied >>> I/O error : Permission denied >>> Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission >>> denied. >>> cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, >>> stepping 9. >>> cpuinfo: CPU measured at 2658.094MHz. >>> tvtime: Cannot set priority to -10: Permission denied. >>> xcommon: Display :1.0, vendor The X.Org Foundation, vendor release >>> 10900000 >>> xfullscreen: Using XINERAMA for dual-head information. >>> xfullscreen: Pixels are square. >>> xfullscreen: Number of displays is 1. >>> xfullscreen: Head 0 at 0,0 with size 1024x768. >>> xcommon: Have XTest, will use it to ping the screensaver. >>> >>> >> >> on the mplayer, i installed and ran as indicated. I got video all >> right (citizen actually), but no sound. >> >> >> >> >> >> On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> >> wrote: >> > >> > Connect the tv audio o... >> >> >> _______________________________________________ >> Skunkworks mailing list >> Skunkworks@lists.my.co.ke >> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >> ------------ >> Skunkworks Rules >> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >> ------------ >> Other services @ http://my.co.ke >> >> >> _______________________________________________ >> Skunkworks mailing list >> Skunkworks@lists.my.co.ke >> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >> ------------ >> Skunkworks Rules >> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >> ------------ >> Other services @ http://my.co.ke >> > > > > -- > Lusiola Brian > |3 R 1 /-\ |\| > > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke >
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Mark Mwangi
Skype : mark.mwangy
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
@ Mark. I got mine through unified-concepts <http://www.unified-concepts.co.ke>. Please contact them as I am not sure on what they have in stock.
@Ndungi I don't have the channel list of my own memory, I had to remove Micro$oft, I can get you a full channel list that is available later.
@Brainiac Nime float. ??? [?] Hiyo ni nini? All I have is a DVB-T usb receiver. Trying to do some research for work :D
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
nope, frustrated as ever, i have an old machine (HP XW6000 workstation, ubuntu reads 4Cpus yet i suspect its two, graphics card is ish ish (had to login to safe graphics mode), sound is fine, resolution stuck at the default and still on tvtime i see video on video source= television, and hear audio on video source= composite1, composite2 and svideo... dmesg prints out soo much gibberish im even scared of pasting it here. On Mon, Oct 25, 2010 at 4:10 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Brainiac,
Any success with audio?
On 25 October 2010 10:45, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 1:14 PM, [ Brainiac ] <arebacollins@gmail.com>wrote:
im imagining that the DVB card is used in place of a Decoder fr F2A channels.... right ?
On Mon, Oct 25, 2010 at 11:43 AM, Mark Mwangi <mwangy@gmail.com> wrote:
@ brian where can I get the dvb usb dongle? are they available locally?
On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
> Good morning Brian, > > Am yet to try out any DVB-x card, I have dwelt entirely in the > saa713x / bttv realm. That said, I see there are no complaints in your dmesg > output so I assume the card driver was setup ok, and it might only be a > reception/antennae problem (as is generally common with any other usb tv > cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T > card ? > > > On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote: > >> <Hijack> >> Goodmorning Ndungi, >> I have a DTV usb dongle. >> Here is my dmesg output >> >> [103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed >> interval: 16 -> 8 >> [103982.672522] input: Afatech DVB-T 2 as >> /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 >> [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB >> HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 >> [103983.008382] AF901X: af901x_module_init >> [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in >> warm state. >> [103984.202858] dvb-usb: will pass the complete MPEG2 transport >> stream to the software demuxer. >> [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T >> Recevier) >> [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB >> DVB-T)... >> [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully >> initialized and connected. >> [103984.207975] usbcore: registered new interface driver >> dvb_usb_af901x >> >> I haveAm trying to scan for channels using w-scan without any >> success >> >> On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com>wrote: >> >>> Try rmmod-ing saa7134 _alsa too, or any other dependent module >>> until rmmod saa7134 succeeds silently. Only then can you say you've reloaded >>> the driver with the correct options. Also fungua alsa-mixer and raise the >>> line and 3d volume just to b sure.. all the best! >>> >>> On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> >>> wrote: >>> >>> nothing seems to work after the first two: in fact tvtime now just >>> flickers on and then goes... >>> >>> areba@areba-desktop:~$ rmmod saa7134 >>>> ERROR: Module saa7134 is in use by saa7134_alsa >>>> areba@areba-desktop:~$ sudo rmmod saa7134 >>>> [sudo] password for areba: >>>> ERROR: Module saa7134 is in use by saa7134_alsa >>>> areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 >>>> WARNING: All config files need .conf: /etc/modprobe.d/options, it >>>> will be ignored in a future release. >>>> areba@areba-desktop:~$ tvtime >>>> Running tvtime 1.0.2. >>>> Reading configuration from /etc/tvtime/tvtime.xml >>>> I/O warning : failed to load external entity >>>> "/home/areba/.tvtime/tvtime.xml" >>>> I/O error : Permission denied >>>> I/O error : Permission denied >>>> Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission >>>> denied. >>>> cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, >>>> stepping 9. >>>> cpuinfo: CPU measured at 2658.094MHz. >>>> tvtime: Cannot set priority to -10: Permission denied. >>>> xcommon: Display :1.0, vendor The X.Org Foundation, vendor release >>>> 10900000 >>>> xfullscreen: Using XINERAMA for dual-head information. >>>> xfullscreen: Pixels are square. >>>> xfullscreen: Number of displays is 1. >>>> xfullscreen: Head 0 at 0,0 with size 1024x768. >>>> xcommon: Have XTest, will use it to ping the screensaver. >>>> >>>> >>> >>> on the mplayer, i installed and ran as indicated. I got video all >>> right (citizen actually), but no sound. >>> >>> >>> >>> >>> >>> On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> >>> wrote: >>> > >>> > Connect the tv audio o... >>> >>> >>> _______________________________________________ >>> Skunkworks mailing list >>> Skunkworks@lists.my.co.ke >>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>> ------------ >>> Skunkworks Rules >>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>> ------------ >>> Other services @ http://my.co.ke >>> >>> >>> _______________________________________________ >>> Skunkworks mailing list >>> Skunkworks@lists.my.co.ke >>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>> ------------ >>> Skunkworks Rules >>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>> ------------ >>> Other services @ http://my.co.ke >>> >> >> >> >> -- >> Lusiola Brian >> |3 R 1 /-\ |\| >> >> >> >> _______________________________________________ >> Skunkworks mailing list >> Skunkworks@lists.my.co.ke >> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >> ------------ >> Skunkworks Rules >> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >> ------------ >> Other services @ http://my.co.ke >> > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke >
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Mark Mwangi
Skype : mark.mwangy
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
@ Mark. I got mine through unified-concepts <http://www.unified-concepts.co.ke>. Please contact them as I am not sure on what they have in stock.
@Ndungi I don't have the channel list of my own memory, I had to remove Micro$oft, I can get you a full channel list that is available later.
@Brainiac Nime float. ??? [?] Hiyo ni nini? All I have is a DVB-T usb receiver. Trying to do some research for work :D
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards, Collins Areba. *Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
@brian: DVB is digital video broadcast, meaning that your card can as well act as a set top box for free to air channels. this should be the case i think... On Mon, Oct 25, 2010 at 5:59 PM, [ Brainiac ] <arebacollins@gmail.com>wrote:
nope, frustrated as ever, i have an old machine (HP XW6000 workstation, ubuntu reads 4Cpus yet i suspect its two, graphics card is ish ish (had to login to safe graphics mode), sound is fine, resolution stuck at the default and still on tvtime i see video on video source= television, and hear audio on video source= composite1, composite2 and svideo...
dmesg prints out soo much gibberish im even scared of pasting it here.
On Mon, Oct 25, 2010 at 4:10 PM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Brainiac,
Any success with audio?
On 25 October 2010 10:45, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 1:14 PM, [ Brainiac ] <arebacollins@gmail.com>wrote:
im imagining that the DVB card is used in place of a Decoder fr F2A channels.... right ?
On Mon, Oct 25, 2010 at 11:43 AM, Mark Mwangi <mwangy@gmail.com> wrote:
@ brian where can I get the dvb usb dongle? are they available locally?
On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
> On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com>wrote: > >> Good morning Brian, >> >> Am yet to try out any DVB-x card, I have dwelt entirely in the >> saa713x / bttv realm. That said, I see there are no complaints in your dmesg >> output so I assume the card driver was setup ok, and it might only be a >> reception/antennae problem (as is generally common with any other usb tv >> cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T >> card ? >> >> >> On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote: >> >>> <Hijack> >>> Goodmorning Ndungi, >>> I have a DTV usb dongle. >>> Here is my dmesg output >>> >>> [103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed >>> interval: 16 -> 8 >>> [103982.672522] input: Afatech DVB-T 2 as >>> /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 >>> [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB >>> HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 >>> [103983.008382] AF901X: af901x_module_init >>> [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in >>> warm state. >>> [103984.202858] dvb-usb: will pass the complete MPEG2 transport >>> stream to the software demuxer. >>> [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T >>> Recevier) >>> [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB >>> DVB-T)... >>> [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully >>> initialized and connected. >>> [103984.207975] usbcore: registered new interface driver >>> dvb_usb_af901x >>> >>> I haveAm trying to scan for channels using w-scan without any >>> success >>> >>> On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com>wrote: >>> >>>> Try rmmod-ing saa7134 _alsa too, or any other dependent module >>>> until rmmod saa7134 succeeds silently. Only then can you say you've reloaded >>>> the driver with the correct options. Also fungua alsa-mixer and raise the >>>> line and 3d volume just to b sure.. all the best! >>>> >>>> On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> >>>> wrote: >>>> >>>> nothing seems to work after the first two: in fact tvtime now just >>>> flickers on and then goes... >>>> >>>> areba@areba-desktop:~$ rmmod saa7134 >>>>> ERROR: Module saa7134 is in use by saa7134_alsa >>>>> areba@areba-desktop:~$ sudo rmmod saa7134 >>>>> [sudo] password for areba: >>>>> ERROR: Module saa7134 is in use by saa7134_alsa >>>>> areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 >>>>> WARNING: All config files need .conf: /etc/modprobe.d/options, it >>>>> will be ignored in a future release. >>>>> areba@areba-desktop:~$ tvtime >>>>> Running tvtime 1.0.2. >>>>> Reading configuration from /etc/tvtime/tvtime.xml >>>>> I/O warning : failed to load external entity >>>>> "/home/areba/.tvtime/tvtime.xml" >>>>> I/O error : Permission denied >>>>> I/O error : Permission denied >>>>> Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission >>>>> denied. >>>>> cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, >>>>> stepping 9. >>>>> cpuinfo: CPU measured at 2658.094MHz. >>>>> tvtime: Cannot set priority to -10: Permission denied. >>>>> xcommon: Display :1.0, vendor The X.Org Foundation, vendor >>>>> release 10900000 >>>>> xfullscreen: Using XINERAMA for dual-head information. >>>>> xfullscreen: Pixels are square. >>>>> xfullscreen: Number of displays is 1. >>>>> xfullscreen: Head 0 at 0,0 with size 1024x768. >>>>> xcommon: Have XTest, will use it to ping the screensaver. >>>>> >>>>> >>>> >>>> on the mplayer, i installed and ran as indicated. I got video all >>>> right (citizen actually), but no sound. >>>> >>>> >>>> >>>> >>>> >>>> On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> >>>> wrote: >>>> > >>>> > Connect the tv audio o... >>>> >>>> >>>> _______________________________________________ >>>> Skunkworks mailing list >>>> Skunkworks@lists.my.co.ke >>>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>>> ------------ >>>> Skunkworks Rules >>>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>>> ------------ >>>> Other services @ http://my.co.ke >>>> >>>> >>>> _______________________________________________ >>>> Skunkworks mailing list >>>> Skunkworks@lists.my.co.ke >>>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>>> ------------ >>>> Skunkworks Rules >>>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>>> ------------ >>>> Other services @ http://my.co.ke >>>> >>> >>> >>> >>> -- >>> Lusiola Brian >>> |3 R 1 /-\ |\| >>> >>> >>> >>> _______________________________________________ >>> Skunkworks mailing list >>> Skunkworks@lists.my.co.ke >>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>> ------------ >>> Skunkworks Rules >>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>> ------------ >>> Other services @ http://my.co.ke >>> >> >> >> _______________________________________________ >> Skunkworks mailing list >> Skunkworks@lists.my.co.ke >> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >> ------------ >> Skunkworks Rules >> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >> ------------ >> Other services @ http://my.co.ke >> > > Ndungi > The card is correct, so are the drivers. > The next step after having the drivers installed is to scan the > channels. > This is where *w_scan* comes in, or what I have been trying to use. > It is meant to create a channel-list.conf that I am supposed to use with > vlc, all I get is 0 services. > Kaffeine comes with its own scan ap but doesn't seem to be working > for me. > I have tried from different locations within Nairobi, so I really > don't think its signal issue, plus besides it works well on windoze. > Anybody with experience in this. > I would like to know where I am going wrong as I have followed so > many threads from Google University. > Thank you in advance. > > Kind regards, > > -- > Lusiola Brian > |3 R 1 /-\ |\| > > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke >
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Mark Mwangi
Skype : mark.mwangy
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
@ Mark. I got mine through unified-concepts <http://www.unified-concepts.co.ke>. Please contact them as I am not sure on what they have in stock.
@Ndungi I don't have the channel list of my own memory, I had to remove Micro$oft, I can get you a full channel list that is available later.
@Brainiac Nime float. ??? [?] Hiyo ni nini? All I have is a DVB-T usb receiver. Trying to do some research for work :D
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
-- Regards, Collins Areba. *Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
[ 0.442291] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.442473] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.444418] brd: module loaded [ 0.445294] loop: module loaded [ 0.445663] ata_piix 0000:00:1f.1: version 2.13 [ 0.445682] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.445695] alloc irq_desc for 18 on node -1 [ 0.445699] alloc kstat_irqs on node -1 [ 0.445711] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.445786] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.445956] scsi0 : ata_piix [ 0.446118] scsi1 : ata_piix [ 0.446193] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14 [ 0.446197] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15 [ 0.446872] Fixed MDIO Bus: probed [ 0.446933] PPP generic driver version 2.4.2 [ 0.447037] tun: Universal TUN/TAP device driver, 1.6 [ 0.447040] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.447185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.447220] alloc irq_desc for 23 on node -1 [ 0.447224] alloc kstat_irqs on node -1 [ 0.447235] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.447263] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.447268] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.447327] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.447370] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.451257] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.451284] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0500000 [ 0.465551] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.465755] hub 1-0:1.0: USB hub found [ 0.465764] hub 1-0:1.0: 6 ports detected [ 0.465889] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.465916] uhci_hcd: USB Universal Host Controller Interface driver [ 0.465983] alloc irq_desc for 16 on node -1 [ 0.465986] alloc kstat_irqs on node -1 [ 0.465996] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.466009] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.466014] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.466075] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.466116] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440 [ 0.466309] hub 2-0:1.0: USB hub found [ 0.466319] hub 2-0:1.0: 2 ports detected [ 0.466413] alloc irq_desc for 19 on node -1 [ 0.466417] alloc kstat_irqs on node -1 [ 0.466424] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.466434] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.466439] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.466496] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.466534] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460 [ 0.466733] hub 3-0:1.0: USB hub found [ 0.466739] hub 3-0:1.0: 2 ports detected [ 0.466935] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.469943] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.469964] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.470090] mice: PS/2 mouse device common for all mice [ 0.470263] rtc_cmos 00:03: RTC can wake from S4 [ 0.470337] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.470365] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.470554] device-mapper: uevent: version 1.0.3 [ 0.470776] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.470988] device-mapper: multipath: version 1.1.1 loaded [ 0.470995] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.471200] EISA: Probing bus 0 at eisa.0 [ 0.471211] Cannot allocate resource for EISA slot 1 [ 0.471215] Cannot allocate resource for EISA slot 2 [ 0.471246] EISA: Detected 0 cards. [ 0.471561] cpuidle: using governor ladder [ 0.471567] cpuidle: using governor menu [ 0.472177] TCP cubic registered [ 0.472383] NET: Registered protocol family 10 [ 0.473055] lo: Disabled Privacy Extensions [ 0.473514] NET: Registered protocol family 17 [ 0.473644] Using IPI No-Shortcut mode [ 0.473825] PM: Resume from disk failed. [ 0.473846] registered taskstats version 1 [ 0.474133] Magic number: 14:362:627 [ 0.474240] rtc_cmos 00:03: setting system clock to 2010-10-24 09:38:54 UTC (1287913134) [ 0.474245] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.474248] EDD information not available. [ 0.493768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.621794] ata1.00: ATAPI: ATAPI CD-RW 52X24, F.JZ, max UDMA/33 [ 0.621851] ata1.01: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100 [ 0.621856] ata1.01: 78165360 sectors, multi 16: LBA [ 0.621894] ata1.01: limited to UDMA/33 due to 40-wire cable [ 0.630130] ata2.01: ATA-7: SAMSUNG SP0822N, WA100-31, max UDMA/100 [ 0.630136] ata2.01: 156368016 sectors, multi 16: LBA48 [ 0.630172] ata2.01: limited to UDMA/33 due to 40-wire cable [ 0.637842] ata1.00: configured for UDMA/33 [ 0.645906] ata1.01: configured for UDMA/33 [ 0.646172] ata2.01: configured for UDMA/33 [ 0.722338] Freeing initrd memory: 10728k freed [ 0.795452] isapnp: No Plug & Play device found [ 0.796199] scsi 0:0:0:0: CD-ROM ATAPI CD-RW 52X24 F.JZ PQ: 0 ANSI: 5 [ 0.799126] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 0.799132] Uniform CD-ROM driver Revision: 3.20 [ 0.799312] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.799417] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.799639] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5 [ 0.799850] sd 0:0:1:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.799863] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.799956] sd 0:0:1:0: [sda] Write Protect is off [ 0.799963] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 0.800023] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.800086] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP0822N WA10 PQ: 0 ANSI: 5 [ 0.800365] sd 1:0:1:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.800415] sda: [ 0.800430] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 0.800531] sd 1:0:1:0: [sdb] Write Protect is off [ 0.800538] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.800594] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.800915] sdb: sda1 sda2 < sdb1 sdb2 < sda5 sda6 > [ 0.830796] sd 0:0:1:0: [sda] Attached SCSI disk [ 0.831449] sdb5 > [ 0.831990] sd 1:0:1:0: [sdb] Attached SCSI disk [ 0.832017] Freeing unused kernel memory: 684k freed [ 0.832821] Write protecting the kernel text: 4932k [ 0.832907] Write protecting the kernel read-only data: 1976k [ 0.867221] udev[103]: starting version 163 [ 0.953348] xor: automatically using best checksumming function: pIII_sse [ 0.969470] pIII_sse : 2343.000 MB/sec [ 0.969484] xor: using function: pIII_sse (2343.000 MB/sec) [ 1.028479] tg3.c:v3.110 (April 9, 2010) [ 1.028523] alloc irq_desc for 21 on node -1 [ 1.028528] alloc kstat_irqs on node -1 [ 1.028548] tg3 0000:05:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.032602] device-mapper: dm-raid45: initialized v0.2594b [ 1.060809] FDC 0 is a post-1991 82077 [ 1.079400] tg3 0000:05:02.0: eth0: Tigon3 [partno(BCM95702A20) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0e:7f:ae:a3:c9 [ 1.079410] tg3 0000:05:02.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.079417] tg3 0000:05:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.079423] tg3 0000:05:02.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 1.079568] aic79xx 0000:05:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.342508] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem [ 1.342517] EXT4-fs (sdb1): write access will be enabled during recovery [ 3.207239] EXT4-fs (sdb1): orphan cleanup on readonly fs [ 3.207255] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 85 [ 3.207304] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 84 [ 3.207323] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 79 [ 3.207342] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 72 [ 3.207360] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 60 [ 3.207377] EXT4-fs (sdb1): 5 orphan inodes deleted [ 3.207383] EXT4-fs (sdb1): recovery complete [ 3.549023] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 6.308042] scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 6.308045] <Adaptec AIC7902 Ultra320 SCSI adapter> [ 6.308046] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66MHz, 512 SCBs [ 6.308361] alloc irq_desc for 22 on node -1 [ 6.308366] alloc kstat_irqs on node -1 [ 6.308381] aic79xx 0000:05:0c.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 11.532037] scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 11.532040] <Adaptec AIC7902 Ultra320 SCSI adapter> [ 11.532042] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66MHz, 512 SCBs [ 22.381784] udev[331]: starting version 163 [ 22.411428] lp: driver loaded but no devices found [ 22.431773] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.515529] intel_rng: Firmware space is locked read-only. If you can't or [ 22.515537] intel_rng: don't want to disable this in firmware setup, and if [ 22.515541] intel_rng: you are certain that your system has a functional [ 22.515547] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 22.530888] Adding 3004116k swap on /dev/sdb5. Priority:-1 extents:1 across:3004116k [ 22.598370] Linux agpgart interface v0.103 [ 22.694221] agpgart-intel 0000:00:00.0: Intel E7505 Chipset [ 22.751610] IR NEC protocol handler initialized [ 22.772867] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 22.774143] IR RC5(x) protocol handler initialized [ 22.792262] parport_pc 00:07: reported by Plug and Play ACPI [ 22.792336] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 22.818325] Linux video capture interface: v2.00 [ 22.836648] EDAC MC: Ver: 2.1.0 Oct 16 2010 [ 22.840130] IR RC6 protocol handler initialized [ 22.862199] type=1400 audit(1287902356.882:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=529 comm="apparmor_parser" [ 22.863090] type=1400 audit(1287902356.882:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=529 comm="apparmor_parser" [ 22.863618] type=1400 audit(1287902356.882:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=529 comm="apparmor_parser" [ 22.866630] IR JVC protocol handler initialized [ 22.879315] type=1400 audit(1287902356.898:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=544 comm="apparmor_parser" [ 22.880335] lp0: using parport0 (interrupt-driven). [ 22.891029] psmouse serio1: ID: 10 00 64 [ 22.891632] ppdev: user-space parallel port driver [ 22.904602] IR Sony protocol handler initialized [ 22.948753] saa7130/34: v4l2 driver version 0.2.16 loaded [ 22.948893] saa7134 0000:05:0d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 22.948913] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 22.948929] saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV Stereo (saa7134) [card=26,insmod option] [ 22.948974] saa7130[0]: board init: gpio is 60cd00 [ 22.949993] lirc_dev: IR Remote Control driver registered, major 251 [ 22.954830] IR LIRC bridge handler initialized [ 22.955228] nvidia: module license 'NVIDIA' taints kernel. [ 22.955235] Disabling lock debugging due to kernel taint [ 23.002426] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 23.063085] saa7130[0]: Huh, no eeprom present (err=-5)? [ 23.106942] alloc irq_desc for 17 on node -1 [ 23.106950] alloc kstat_irqs on node -1 [ 23.106967] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 23.107044] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 23.120050] All bytes are equal. It is not a TEA5767 [ 23.120384] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 23.140065] mt20xx 0-0060: microtune: companycode=7474 part=74 rev=74 [ 23.140075] mt20xx 0-0060: microtune unknown found, not (yet?) supported, sorry :-/ [ 23.140366] tuner 0-0060: Tuner has no way to set tv freq [ 23.140373] tuner 0-0060: Tuner has no way to set tv freq [ 23.140666] saa7130[0]: registered device video0 [v4l2] [ 23.140735] saa7130[0]: registered device vbi0 [ 23.163082] saa7134 ALSA driver for DMA sound loaded [ 23.163093] saa7130[0]/alsa: Pinnacle PCTV Stereo (saa7134) doesn't support digital audio [ 23.174577] tuner 0-0060: Tuner has no way to set tv freq [ 23.175455] tuner 0-0060: Tuner has no way to set tv freq [ 23.331512] type=1400 audit(1287902357.350:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=777 comm="apparmor_parser" [ 23.332299] type=1400 audit(1287902357.354:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=777 comm="apparmor_parser" [ 23.336052] type=1400 audit(1287902357.358:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=777 comm="apparmor_parser" [ 23.347213] type=1400 audit(1287902357.366:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=781 comm="apparmor_parser" [ 23.347626] type=1400 audit(1287902357.366:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=778 comm="apparmor_parser" [ 23.348329] type=1400 audit(1287902357.370:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=781 comm="apparmor_parser" [ 23.480027] intel8x0_measure_ac97_clock: measured 55391 usecs (2669 samples) [ 23.480034] intel8x0: clocking to 48000 [ 23.711780] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.036663] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 24.270351] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 24.270359] vboxdrv: Successfully done. [ 24.270364] vboxdrv: Found 4 processor cores. [ 24.271349] vboxdrv: fAsync=0 offMin=0x7a0 offMax=0x3d84 [ 24.273786] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.273804] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001). [ 24.492675] NVRM: The NVIDIA Quadro2 MXR/EX/Go GPU installed in this system is [ 24.492681] NVRM: supported through the NVIDIA 96.43.xx Legacy drivers. Please [ 24.492684] NVRM: visit http://www.nvidia.com/object/unix.html for more [ 24.492686] NVRM: information. The 260.19.06 NVIDIA driver will ignore [ 24.492688] NVRM: this GPU. Continuing probe... [ 24.492708] NVRM: No NVIDIA graphics adapter found! [ 25.312140] tg3 0000:05:02.0: eth0: Link is up at 100 Mbps, full duplex [ 25.312145] tg3 0000:05:02.0: eth0: Flow control is off for TX and off for RX [ 25.312323] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.008320] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 32.438708] tuner 0-0060: Tuner has no way to set tv freq [ 33.003375] tuner 0-0060: Tuner has no way to set tv freq [ 35.456016] eth0: no IPv6 routers present [ 40.226695] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 52.862902] cdrom: failed setting lba address space [ 52.913839] cdrom: failed setting lba address space [ 53.098652] UDF-fs: Partition marked readonly; forcing readonly mount [ 53.116461] UDF-fs INFO UDF: Mounting volume 'Alice & Collins', timestamp 2009/03/11 02:21 (10b4) [ 90.326624] lo: Disabled Privacy Extensions [ 225.962212] saa7134 ALSA driver for DMA sound unloaded [ 251.361232] saa7130/34: v4l2 driver version 0.2.16 loaded [ 251.361318] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 251.361332] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyDVB-T / Genius VideoWonder DVB-T [card=86,insmod option] [ 251.361377] saa7130[0]: board init: gpio is 60cd00 [ 251.424023] Registered IR keymap rc-flydvb [ 251.424226] input: saa7134 IR (LifeView FlyDVB-T / as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0/input4 [ 251.424386] rc0: saa7134 IR (LifeView FlyDVB-T / as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0 [ 251.529765] saa7130[0]: Huh, no eeprom present (err=-5)? [ 251.548026] All bytes are equal. It is not a TEA5767 [ 251.548200] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 251.565523] tuner-simple 0-0060: creating new instance [ 251.565530] tuner-simple 0-0060: type set to 81 (Partsnic (Daewoo) PTI-5NF05) [ 251.573691] saa7130[0]: registered device video0 [v4l2] [ 251.573750] saa7130[0]: registered device vbi0 [ 251.591765] saa7134 ALSA driver for DMA sound loaded [ 251.591774] saa7130[0]/alsa: LifeView FlyDVB-T / Genius VideoWonder DVB-T doesn't support digital audio [ 251.642564] dvb_init() allocating 1 frontend [ 251.667849] tda10046: chip is not answering. Giving up. [ 325.642358] saa7134 ALSA driver for DMA sound unloaded [ 341.465717] tuner-simple 0-0060: destroying instance [ 361.632118] saa7130/34: v4l2 driver version 0.2.16 loaded [ 361.632205] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 361.632218] saa7130[0]: subsystem: 1131:0000, board: Philips Tiger reference design [card=81,insmod option] [ 361.632284] saa7130[0]: board init: gpio is 60cd00 [ 361.736300] saa7130[0]: Huh, no eeprom present (err=-5)? [ 361.752023] All bytes are equal. It is not a TEA5767 [ 361.752205] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 361.760019] tuner-simple 0-0060: creating new instance [ 361.760025] tuner-simple 0-0060: type set to 23 (Philips PAL_DK (FI1256 and compatibles)) [ 361.784234] saa7130[0]: registered device video0 [v4l2] [ 361.784336] saa7130[0]: registered device vbi0 [ 361.784430] saa7130[0]: registered device radio0 [ 361.792133] dvb_init() allocating 1 frontend [ 361.799889] saa7134 ALSA driver for DMA sound loaded [ 361.799900] saa7130[0]/alsa: Philips Tiger reference design doesn't support digital audio [ 361.816685] tda10046: chip is not answering. Giving up. [ 403.598885] saa7134 ALSA driver for DMA sound unloaded [ 414.773970] tuner-simple 0-0060: destroying instance [ 424.238859] saa7130/34: v4l2 driver version 0.2.16 loaded [ 424.238947] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 424.238960] saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV Stereo (saa7134) [card=26,insmod option] [ 424.239027] saa7130[0]: board init: gpio is 40cd00 [ 424.340272] saa7130[0]: Huh, no eeprom present (err=-5)? [ 424.361032] All bytes are equal. It is not a TEA5767 [ 424.361212] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 424.377019] mt20xx 0-0060: microtune: companycode=3232 part=32 rev=32 [ 424.377024] mt20xx 0-0060: microtune unknown found, not (yet?) supported, sorry :-/ [ 424.377194] tuner 0-0060: Tuner has no way to set tv freq [ 424.377199] tuner 0-0060: Tuner has no way to set tv freq [ 424.377370] saa7130[0]: registered device video0 [v4l2] [ 424.377455] saa7130[0]: registered device vbi0 [ 424.381215] tuner 0-0060: Tuner has no way to set tv freq [ 424.381477] tuner 0-0060: Tuner has no way to set tv freq [ 424.391555] saa7134 ALSA driver for DMA sound loaded [ 424.391564] saa7130[0]/alsa: Pinnacle PCTV Stereo (saa7134) doesn't support digital audio [ 430.499894] tuner 0-0060: Tuner has no way to set tv freq [ 430.499942] tuner 0-0060: Tuner has no way to set tv freq [ 430.499957] tuner 0-0060: Tuner has no way to set tv freq [ 430.578457] tuner 0-0060: Tuner has no way to set tv freq [ 430.578484] tuner 0-0060: Tuner has no way to set tv freq [ 430.658469] tuner 0-0060: Tuner has no way to set tv freq [ 440.147855] tuner 0-0060: Tuner has no way to set tv freq [ 445.633710] tuner 0-0060: Tuner has no way to set tv freq [ 996.540202] tuner 0-0060: Tuner has no way to set tv freq [ 1177.059639] saa7134 ALSA driver for DMA sound unloaded [ 1236.733860] saa7130/34: v4l2 driver version 0.2.16 loaded [ 1236.733944] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 1236.733964] saa7130[0]: subsystem: 1131:0000, board: V-Stream Studio TV Terminator [card=65,insmod option] [ 1236.734071] saa7130[0]: board init: gpio is 40cd00 [ 1236.772027] Registered IR keymap rc-pixelview [ 1236.772268] input: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0/input5 [ 1236.772500] rc0: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0 [ 1236.876327] saa7130[0]: Huh, no eeprom present (err=-5)? [ 1236.896021] All bytes are equal. It is not a TEA5767 [ 1236.896197] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 1236.936013] tda8290: no gate control were provided! [ 1236.936171] tuner 0-0060: Tuner has no way to set tv freq [ 1236.936177] tuner 0-0060: Tuner has no way to set tv freq [ 1236.936345] saa7130[0]: registered device video0 [v4l2] [ 1236.936433] saa7130[0]: registered device vbi0 [ 1236.936530] saa7130[0]: registered device radio0 [ 1236.941857] tuner 0-0060: Tuner has no way to set tv freq [ 1236.955542] saa7134 ALSA driver for DMA sound loaded [ 1236.955559] saa7130[0]/alsa: V-Stream Studio TV Terminator doesn't support digital audio [ 1291.653992] saa7134 ALSA driver for DMA sound unloaded [ 1320.051946] saa7130/34: v4l2 driver version 0.2.16 loaded [ 1320.052030] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 1320.052044] saa7130[0]: subsystem: 1131:0000, board: V-Stream Studio TV Terminator [card=65,insmod option] [ 1320.052125] saa7130[0]: board init: gpio is 40cd00 [ 1320.052143] Registered IR keymap rc-pixelview [ 1320.053362] input: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0/input6 [ 1320.054124] rc0: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0 [ 1320.156296] saa7130[0]: Huh, no eeprom present (err=-5)? [ 1320.173022] All bytes are equal. It is not a TEA5767 [ 1320.173203] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 1320.204022] tda8290: no gate control were provided! [ 1320.204189] tuner 0-0060: Tuner has no way to set tv freq [ 1320.204195] tuner 0-0060: Tuner has no way to set tv freq [ 1320.204362] saa7130[0]: registered device video0 [v4l2] [ 1320.204447] saa7130[0]: registered device vbi0 [ 1320.204562] saa7130[0]: registered device radio0 [ 1320.228415] saa7134 ALSA driver for DMA sound loaded [ 1320.228430] saa7130[0]/alsa: V-Stream Studio TV Terminator doesn't support digital audio [12235.784572] device eth0 entered promiscuous mode [12870.499943] device eth0 left promiscuous mode [20209.401399] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [20304.583378] ata1: drained 2048 bytes to clear DRQ. [20304.583388] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [20304.583395] sr 0:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [20304.583422] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [20304.583423] res 58/00:02:00:00:08/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [20304.583428] ata1.00: status: { DRDY DRQ } [20304.636026] ata1: soft resetting link [20304.825314] ata1.00: configured for UDMA/33 [20304.833221] ata1.01: configured for UDMA/33 [20304.843062] ata1: EH complete [85680.510073] lo: Disabled Privacy Extensions [137846.976019] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137853.696023] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137867.136021] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137893.984468] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137966.625517] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057207095:2057210239 (repaired) [137981.345530] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057207095:2057210239 (repaired) [138010.785516] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057207095:2057210239 (repaired) [138098.252814] show_signal_msg: 24 callbacks suppressed [138098.252829] transmission[5542]: segfault at 702f3035 ip 00269ddf sp bfba7860 error 4 in libgobject-2.0.so.0.2600.0[23d000+40000] [141850.777993] nautilus[1846]: segfault at 6 ip 0059aef8 sp bfc83440 error 4 in libglib-2.0.so.0.2600.0[560000+cd000] [157022.160017] TCP: Peer 112.202.164.188:18156/42298 unexpectedly shrunk window 3322421676:3322428936 (repaired) [164078.347086] ata1: drained 2048 bytes to clear DRQ. [164078.347123] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [164078.347132] sr 0:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [164078.347170] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [164078.347173] res 58/00:02:00:00:08/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [164078.347180] ata1.00: status: { DRDY DRQ } [164078.404028] ata1: soft resetting link [164078.588566] ata1.00: configured for UDMA/33 [164078.602503] ata1.01: configured for UDMA/33 [164078.610947] ata1: EH complete [165835.620029] usb 3-1: new full speed USB device using uhci_hcd and address 2 [165837.114809] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [165837.118437] usbcore: registered new interface driver cdc_acm [165837.118468] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [168809.304069] usb 3-1: USB disconnect, address 2 [168894.212031] usb 3-1: new full speed USB device using uhci_hcd and address 3 [168894.425068] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [171825.730043] usb 3-1: USB disconnect, address 3 [177010.120030] TCP: Peer 195.94.220.42:13544/51079 unexpectedly shrunk window 2746373574:2746373579 (repaired) [177016.129516] TCP: Peer 195.94.220.42:13544/51079 unexpectedly shrunk window 2746373574:2746373579 (repaired) [177028.160026] TCP: Peer 195.94.220.42:13544/51079 unexpectedly shrunk window 2746373574:2746373579 (repaired) [179193.656023] usb 3-1: new full speed USB device using uhci_hcd and address 4 [179193.867078] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [180053.376055] usb 3-1: USB disconnect, address 4 [180912.345056] usb 3-1: new full speed USB device using uhci_hcd and address 5 [180912.557421] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [181022.064065] usb 3-1: USB disconnect, address 5 [181188.228033] usb 3-1: new full speed USB device using uhci_hcd and address 6 [181188.441193] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [181377.068046] usb 1-4: new high speed USB device using ehci_hcd and address 3 [181377.385904] Initializing USB Mass Storage driver... [181377.386212] scsi4 : usb-storage 1-4:1.0 [181377.386852] usbcore: registered new interface driver usb-storage [181377.386863] USB Mass Storage support registered. [181378.416905] scsi 4:0:0:0: Direct-Access Kingston DataTraveler C10 PMAP PQ: 0 ANSI: 0 CCS [181378.420022] sd 4:0:0:0: Attached scsi generic sg3 type 0 [181379.560474] sd 4:0:0:0: [sdc] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB) [181379.562840] sd 4:0:0:0: [sdc] Write Protect is off [181379.562845] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00 [181379.562850] sd 4:0:0:0: [sdc] Assuming drive cache: write through [181379.567837] sd 4:0:0:0: [sdc] Assuming drive cache: write through [181379.567851] sdc: sdc1 [181379.598128] sd 4:0:0:0: [sdc] Assuming drive cache: write through [181379.598138] sd 4:0:0:0: [sdc] Attached SCSI removable disk
First, you see this line : [ 424.238960] saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV Stereo (saa7134) [card=26,insmod option] Is your tv card branded Pinnacle PCTV ? I suspect its not because of this line : [ 361.736300] saa7130[0]: Huh, no eeprom present (err=-5)? Simply means that your card does not have eeprom which usuallu carries info about the card to enable auto-detection work better. My OS usually responds with : saa7134: <rant> saa7134: Congratulations! Your TV card vendor saved a few saa7134: cents for a eeprom, thus your pci board has no saa7134: subsystem ID and I can't identify it automatically saa7134: </rant> Much to my amusement cause that is short of suggesting that it was manufactured in the far east.. :-), but you get the point now. It means you will have to try and `guess` the card number and the tuner number. BTW, you have to get both card number and tuner number right. So enter the saa713x card list<http://www.mjmwired.net/kernel/Documentation/video4linux/CARDLIST.saa7134>, and the tuner list <http://www.gentoo-wiki.info/SAA7134#tuner> . For a head start, I'd suggest you stick to tuner=81, a Phillips TNF-something. I had earlier suggested you use card=86 too when loading the driver but it is possible that your card isnt exactly similar to mine. The best way to determine which card number to pick is to check your card's brand-manufacturer against the 100 or so cards in the card list and make an intelligent guess! Ongeza Line volume (important) on aumix, or start alsamixer on the terminal and increase 'Line'. The last thing you need to do is to unload the driver loaded by ubuntu and reload the same driver but with the correct options : rmmod saa7134_alsa; //you might need to unload other dependent modules sometimes eg saa7134_dvb or somehting like that rmmod saa7134; then reloading, modprobe saa7134 card=<a good guess> tuner=<a good guess>; Again, if yours came from the far east as mine start with card=86. then test it with tvtime or mplayer. If it fails, same cycle : unload, reload, test. All the while making sure audio jack is correctly connected from tvcard to computer sound card. If you are good with bash scripting, you can try automating the process : loop through every card number with every tuner number with your headphones on and a log file. Hack on.. :-) On 26 October 2010 05:05, [ Brainiac ] <arebacollins@gmail.com> wrote:
[ 424.238960] saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV Stereo (saa7134) [card=26,insmod option]
participants (4)
-
[ Brainiac ] -
Brian L -
Mark Mwangi -
Ndungi Kyalo