I'd like to indulge the Cisco gurus on this list. I am configuring the $subject on ASA5505 using ASDM . When I click finish to commit my actions, I end up with one WARNING as shown below:

[OK] access-list ROADWARRIORS_splitTunnelAcl standard permit any

[OK] access-list inside_nat0_outbound line 2 extended permit ip 0.0.0.0 0.0.0.0 192.168.31.0 255.255.255.224

[OK] username test password ScEIFvbu66G9uC.V encrypted privilege 0

[OK] username test attributes

      username test attributes

[WARNING] vpn-group-policy ROADWARRIORS

                 group-policy <ROADWARRIORS> does not exist

 

[OK] ip local pool REMOTECLIENTPOOL 192.168.31.11-192.168.31.20 mask 255.255.255.0

[OK] group-policy ROADWARRIORS internal

[OK] group-policy ROADWARRIORS attributes

      group-policy ROADWARRIORS attributes

[OK] vpn-tunnel-protocol IPSec

[OK] split-tunnel-policy tunnelspecified

[OK] split-tunnel-network-list value ROADWARRIORS_splitTunnelAcl

[OK] dns-server value 192.168.30.1

[OK] default-domain value testdomain.local

[OK] configure terminal

[OK] tunnel-group ROADWARRIORS type ipsec-ra

[OK] tunnel-group ROADWARRIORS general-attributes

      tunnel-group ROADWARRIORS general-attributes

[OK] default-group-policy ROADWARRIORS

[OK] address-pool  REMOTECLIENTPOOL

[OK] tunnel-group ROADWARRIORS ipsec-attributes

      tunnel-group ROADWARRIORS ipsec-attributes

[OK] pre-shared-key V3r1sEkRiTT!!

[OK] crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

[OK] crypto dynamic-map outside_dyn_map 20 set  pfs group2

[OK] crypto dynamic-map outside_dyn_map 20 set  transform-set  ESP-3DES-SHA



1. What could be the possible cause of this problem? I am following the Cisco guide at http://lix.in/-974bf1.
2. Anyone willing to share with me the "relevant" VPN Client, with support for x86/x64?:)

Thank you.
--
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Damn!!