On 8 December 2010 18:24, <tonnie@swiftkenya.com> wrote:
Hi Skunks
I?m trying to configure auto-failover between KDN and Safcom links, with KDN being the primary. My router config is as below
Interfaces
interface GigabitEthernet0/0 description LAN ip address 192.168.7.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 Description KDN Link ip address 172.220.70.34 255.255.255.252 duplex auto speed auto ! interface FastEthernet0/0/0 description Link to Safaricom ip address 172.30.6.182 255.255.255.252 duplex auto speed auto !
BGP Config
router bgp 65200 no synchronization bgp log-neighbor-changes network 132.147.160.0 mask 255.255.255.0 network 172.16.0.0 mask 255.255.255.0 network 192.168.7.0 timers bgp 30 45 neighbor 172.30.6.181 remote-as 37061 neighbor 172.30.6.181 ebgp-multihop 3 neighbor 172.30.6.181 update-source FastEthernet0/0/0 neighbor 172.30.6.181 weight 100 neighbor 172.30.6.181 prefix-list INSECTA-ROUTE out neighbor 172.220.70.33 remote-as 65160 neighbor 172.220.70.33 ebgp-multihop 3 neighbor 172.220.70.33 update-source GigabitEthernet0/1 neighbor 172.220.70.33 weight 1000 neighbor 172.220.70.33 prefix-list INSECTA-ROUTE out no auto-summary !
mix, route-maps, AS-PATH and IP SLA ().
Wilson.
When I shut down KDN interface, Safcom link picks up traffic, but when I bring up the KDN interface, it doesn?t come as primary until I shut down Safaricom. I have given KDN link the required weight.
Could there be a syntax I have missed out?
Regards Anthony
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke