On Tue, Dec 7, 2010 at 7:29 AM, aki <aki275@gmail.com> wrote:
@Wash, a couple things you can try. Firstly I hope you set the command below on both routers, it cannot work on one side alone.
I set the command on both sides, yes.
Remove the routers and physically connect the 2 routers wan ports ( use cat6 and may need a cross-over cable ) and test the setup.
One router is in Nairobi. The other one is in the UK ;-)
This way, you know the 1500bytes window is guaranteed and no service provider inbetween.
I am going to start blaming the service provider for this, I tell you.
It could be that one of your site is on wimax and the other on fiber thus creating issues for gre.
That is very true. Nairobi site is on WiMAX while the UK site is on fiber.
On GRE, think it is 23 or 26bytes. Also do away with GRE and try out ipsec and see if that brings the tunnels up. A guide to ipsec : http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080...
HTHs. :-)
Wacha I read that and see where I end, before I blame it all on the wimax provider ... -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Damn!!