got contact for sybase kenya guys who can help me with the issue On Tue, Mar 23, 2010 at 6:08 PM, wambugu esther <essiekui@gmail.com> wrote:
thanks alot, u got his contacts lakini
On Tue, Mar 23, 2010 at 4:50 PM, Haggai Nyang <haggai.nyang@gmail.com>wrote:
I remember the article said Sybase guys were looking into it but there was no info then on patch availability. Maybe contact some local Sybase guys...? Ama you're working with the local rep :) got Hapo sina habari :(
On Tue, Mar 23, 2010 at 4:40 PM, wambugu esther <essiekui@gmail.com>wrote:
yeah sure,i hv also read the same but on HPUX but i was wondering could you be knowing of any patch recommended for HPUX itanium sybase
On Tue, Mar 23, 2010 at 4:37 PM, Haggai Nyang <haggai.nyang@gmail.com>wrote:
If you haven't experienced errors with other processes then it's a patch issue.
I read somewhere (can't remember though) that there's a bug like that with Sybase on Solaris, don't know if it also applies to HP-UX. The random info we collect hapa na pale :)
On Tue, Mar 23, 2010 at 4:31 PM, wambugu esther <essiekui@gmail.com>wrote:
Thanks Haggai, but this is a new server actually with an EVA storage
On Tue, Mar 23, 2010 at 4:06 PM, Haggai Nyang < haggai.nyang@gmail.com> wrote:
Another usually overlooked issue, I hope you don't have a dusty motherboard inside. You can form micro-circuits that make you want to pull your hair - I've been there before :)
On Tue, Mar 23, 2010 at 4:01 PM, Haggai Nyang <haggai.nyang@gmail.com > wrote:
> Looks like something related to nfs not performing as it should. In > short you might have a RAID cascade problem, probably a faulty backplane? > Maybe try swapping it...but hold it first... > > The log timestamps dont match at all, which leads me to think maybe > it's some resource that's just being overwhelmed over time...cpu, disk i/o > etc > > On the other hand, the first line of your log "process infected with > 10" means you have a bus timeout issue which points more to a h/w problem > than s/w. > > So as long as your server room feels like you must go in with a parka > , maybe you also have a RAM issue. I'd tick off the possibilities in this > order: > > - Ensure your server room is freezing :) > - Swap the RAM if you can from another 'perfectly working' box > and monitor for at least an hour under usual load > - Check your RAID setup > > I've hit my last synapses for that line of thought :) > > > > On Tue, Mar 23, 2010 at 2:50 PM, wambugu esther <essiekui@gmail.com>wrote: > >> yes.. >> this is the last lines of the syslog.log >> >> >> Mar 23 10:49:01 equinoxa vmunix: NOTICE: USB device attached. >> Identification St >> ring: >> Mar 23 10:49:02 equinoxa above message repeats 2 times >> Mar 23 10:49:01 equinoxa vmunix: 0/0/2/2 UsbEhci >> Mar 23 10:49:01 equinoxa vmunix: 0/0/4/0 gvid_core >> Mar 23 10:49:01 equinoxa vmunix: 0/1 lba >> Mar 23 10:49:01 equinoxa vmunix: 0/1/1/0 igelan >> Mar 23 10:49:01 equinoxa vmunix: 0/1/1/1 igelan >> Mar 23 10:49:01 equinoxa vmunix: 0/2 lba >> Mar 23 10:49:01 equinoxa vmunix: sasd: Claimed HP PCI/PCI-X SAS MPT >> adapter at h >> ardware path 0/2/1/0 >> Mar 23 10:49:01 equinoxa vmunix: 0/2/1/0 sasd >> Mar 23 10:49:01 equinoxa vmunix: 0/2/2/0 igelan >> Mar 23 10:49:01 equinoxa vmunix: 0/2/2/1 igelan >> Mar 23 10:49:01 equinoxa vmunix: 0/3 gh2p >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0 PCItoPCI >> Mar 23 10:49:01 equinoxa vmunix: fcd: Claimed HP 404986-001 4Gb >> Fibre Channel po >> rt at hardware path 0/3/0/0/0/0 (FC Port 1 on HBA) >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0 fcd >> Mar 23 10:49:01 equinoxa vmunix: fcd: Claimed HP 404986-001 4Gb >> Fibre Channel po >> rt at hardware path 0/3/0/0/0/1 (FC Port 2 on HBA) >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1 fcd >> Mar 23 10:49:01 equinoxa vmunix: 0/4 gh2p >> Mar 23 10:49:01 equinoxa vmunix: 0/4/0/0 PCItoPCI >> Mar 23 10:49:01 equinoxa vmunix: 0/5 gh2p >> Mar 23 10:49:01 equinoxa vmunix: 0/5/0/0 PCItoPCI >> Mar 23 10:49:01 equinoxa vmunix: 120 processor >> Mar 23 10:49:01 equinoxa vmunix: 122 processor >> Mar 23 10:49:01 equinoxa vmunix: 124 processor >> Mar 23 10:49:01 equinoxa vmunix: 126 processor >> Mar 23 10:49:01 equinoxa vmunix: 128 processor >> Mar 23 10:49:01 equinoxa vmunix: 130 processor >> Mar 23 10:49:01 equinoxa vmunix: 132 processor >> Mar 23 10:49:01 equinoxa vmunix: 134 processor >> Mar 23 10:49:01 equinoxa vmunix: 250 pdh >> Mar 23 10:49:01 equinoxa vmunix: 250/0 ipmi >> Mar 23 10:49:01 equinoxa vmunix: 250/1 asio0 >> Mar 23 10:49:01 equinoxa vmunix: 250/2 acpi_node >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1 fcd_fcp >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.255.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.255.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.255.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.255.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.255.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.255.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0.1 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0.2 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0.1 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0.3 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0.2 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0.4 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0.3 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.0.0.0.0.5 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0.4 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/0.1.11.0.0.0.5 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1 fcd_fcp >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.255.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.255.0 fcd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.255.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.255.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.255.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0.1 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.255.0.0.0 sctl >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0.2 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0.3 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0.1 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0.4 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0.2 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.11.0.0.0.5 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0.3 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0.4 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/3/0/0/0/1.1.0.0.0.0.5 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 0/2/1/0.0.0 sasd_vbus >> Mar 23 10:49:01 equinoxa vmunix: 0/2/1/0.0.0.0 tgt >> Mar 23 10:49:01 equinoxa vmunix: 0/2/1/0.0.0.0.0 sdisk >> Mar 23 10:49:01 equinoxa vmunix: 255/0 iscsi >> Mar 23 10:49:01 equinoxa vmunix: Boot device's HP-UX HW path is: >> 0/2/1/0.0.0.0.0 >> Mar 23 10:49:01 equinoxa vmunix: >> Mar 23 10:49:01 equinoxa vmunix: System Console is on the ITE >> Mar 23 10:49:01 equinoxa vmunix: igelan2: INITIALIZING HP PCI-X >> 1000Mbps Dual-po >> rt Built-in at hardware path 0/2/2/0 >> Mar 23 10:49:01 equinoxa vmunix: igelan0: INITIALIZING HP PCI-X >> 1000Mbps Dual-po >> rt Built-in at hardware path 0/1/1/0 >> Mar 23 10:49:01 equinoxa vmunix: igelan1: INITIALIZING HP PCI-X >> 1000Mbps Dual-po >> rt Built-in at hardware path 0/1/1/1 >> Mar 23 10:49:01 equinoxa vmunix: igelan3: INITIALIZING HP PCI-X >> 1000Mbps Dual-po >> rt Built-in at hardware path 0/2/2/1 >> Mar 23 10:49:01 equinoxa vmunix: Logical volume 64, 0x3 configured >> as ROOT >> Mar 23 10:49:01 equinoxa vmunix: Logical volume 64, 0x2 configured >> as SWAP >> Mar 23 10:49:01 equinoxa vmunix: Logical volume 64, 0x2 configured >> as DUMP >> Mar 23 10:49:01 equinoxa vmunix: Swap device table: (start & >> size given in >> 512-byte blocks) >> Mar 23 10:49:01 equinoxa vmunix: entry 0 - major is 64, >> minor is 0x2; st >> art = 0, size = 33554432 >> Mar 23 10:49:01 equinoxa vmunix: Dump device table: (start & >> size given in >> 1-Kbyte blocks) >> Mar 23 10:49:01 equinoxa vmunix: entry 0000000000000000 - >> major is 31, m >> inor is 0x90000; start = 2349940, size = 16777212 >> Mar 23 10:49:01 equinoxa vmunix: Starting the STREAMS daemons-phase >> 1 >> Mar 23 10:49:01 equinoxa vmunix: Create STCP device files >> Mar 23 10:49:01 equinoxa vmunix: Starting the STREAMS daemons-phase >> 2 >> Mar 23 10:49:01 equinoxa vmunix: $Revision: vmunix: >> B11.23_LR FLAVOR=per >> f Fri Aug 29 22:35:38 PDT 2003 $ >> Mar 23 10:49:01 equinoxa vmunix: Memory Information: >> Mar 23 10:49:01 equinoxa vmunix: physical page size = 4096 >> bytes, logical pa >> ge size = 4096 bytes >> Mar 23 10:49:01 equinoxa vmunix: Physical: 25134816 Kbytes, >> lockable: 215688 >> 12 Kbytes, available: 22053740 Kbytes >> Mar 23 10:49:01 equinoxa vmunix: >> Mar 23 10:49:02 equinoxa nettl[1193]: nettl starting up. >> Mar 23 10:49:15 equinoxa sshd[1483]: Server listening on :: port 22. >> Mar 23 10:49:15 equinoxa sshd[1483]: Server listening on 0.0.0.0 >> port 22. >> Mar 23 10:49:15 equinoxa rpcbind: check_netconfig: Found CLTS >> loopback transport >> Mar 23 10:49:15 equinoxa rpcbind: check_netconfig: Found COTS >> loopback transport >> Mar 23 10:49:15 equinoxa rpcbind: check_netconfig: Found COTS ORD >> loopback trans >> port >> Mar 23 10:49:15 equinoxa rpcbind: init_transport: check binding for >> udp >> Mar 23 10:49:15 equinoxa rpcbind: init_transport: check binding for >> tcp >> Mar 23 10:49:15 equinoxa rpcbind: init_transport: check binding for >> ticlts >> Mar 23 10:49:15 equinoxa rpcbind: init_transport: check binding for >> ticotsord >> Mar 23 10:49:15 equinoxa rpcbind: init_transport: check binding for >> ticots >> Mar 23 10:49:17 equinoxa inetd[1670]: Reading configuration >> Mar 23 10:49:17 equinoxa inetd[1670]: ftp/tcp: Added service, server >> /usr/lbin/f >> tpd >> Mar 23 10:49:17 equinoxa inetd[1670]: telnet/tcp: Added service, >> server /usr/lbi >> n/telnetd >> Mar 23 10:49:17 equinoxa inetd[1670]: tftp/udp: Added service, >> server /usr/lbin/ >> tftpd >> Mar 23 10:49:17 equinoxa inetd[1670]: login/tcp: Added service, >> server /usr/lbin >> /rlogind >> Mar 23 10:49:17 equinoxa inetd[1670]: shell/tcp: Added service, >> server /usr/lbin >> /remshd >> Mar 23 10:49:17 equinoxa inetd[1670]: exec/tcp: Added service, >> server /usr/lbin/ >> rexecd >> Mar 23 10:49:17 equinoxa inetd[1670]: ntalk/udp: Added service, >> server /usr/lbin >> /ntalkd >> Mar 23 10:49:17 equinoxa inetd[1670]: auth/tcp: Added service, >> server /usr/lbin/ >> identd >> Mar 23 10:49:17 equinoxa inetd[1670]: printer/tcp: Added service, >> server /usr/sb >> in/rlpdaemon >> Mar 23 10:49:17 equinoxa inetd[1670]: daytime/tcp: Added service, >> server interna >> l >> Mar 23 10:49:17 equinoxa inetd[1670]: daytime/udp: Added service, >> server interna >> l >> Mar 23 10:49:17 equinoxa inetd[1670]: time/tcp: Added service, >> server internal >> Mar 23 10:49:17 equinoxa inetd[1670]: echo/tcp: Added service, >> server internal >> Mar 23 10:49:17 equinoxa inetd[1670]: echo/udp: Added service, >> server internal >> Mar 23 10:49:17 equinoxa inetd[1670]: discard/tcp: Added service, >> server interna >> l >> Mar 23 10:49:17 equinoxa inetd[1670]: discard/udp: Added service, >> server interna >> l >> Mar 23 10:49:17 equinoxa inetd[1670]: chargen/tcp: Added service, >> server interna >> l >> Mar 23 10:49:17 equinoxa inetd[1670]: chargen/udp: Added service, >> server interna >> l >> Mar 23 10:49:17 equinoxa inetd[1670]: kshell/tcp: Added service, >> server /usr/lbi >> n/remshd >> Mar 23 10:49:17 equinoxa inetd[1670]: klogin/tcp: Added service, >> server /usr/lbi >> n/rlogind >> Mar 23 10:49:17 equinoxa inetd[1670]: recserv/tcp: Added service, >> server /usr/lb >> in/recserv >> Mar 23 10:49:17 equinoxa inetd[1670]: dtspc/tcp: Added service, >> server /usr/dt/b >> in/dtspcd >> Mar 23 10:49:17 equinoxa inetd[1670]: swat/tcp: Added service, >> server /opt/samba >> /bin/swat >> Mar 23 10:49:17 equinoxa inetd[1670]: registrar/tcp: Added service, >> server /etc/ >> opt/resmon/lbin/registrar >> Mar 23 10:49:17 equinoxa inetd[1670]: instl_boots/udp: Added >> service, server /op >> t/ignite/lbin/instl_bootd >> Mar 23 10:49:17 equinoxa inetd[1670]: omni/tcp: Added service, >> server /opt/omni/ >> lbin/inet >> Mar 23 10:49:17 equinoxa inetd[1670]: rpc.cmsd/udp: Added service, >> server /usr/d >> t/bin/rpc.cmsd >> Mar 23 10:49:17 equinoxa inetd[1670]: rpc.ttdbserver/tcp: Added >> service, server >> /usr/dt/bin/rpc.ttdbserver >> Mar 23 10:49:17 equinoxa inetd[1670]: Configuration complete >> Mar 23 10:49:23 equinoxa islpd[2049]: SLPFindSrvs failed: Connection >> timed out >> Mar 23 10:49:25 equinoxa su: + tty?? root-sfmdb >> Mar 23 10:49:46 equinoxa syslog: >> HPUX:IOTreeIndicationProviderModule:enableIndic >> ations:No OLAR slots present >> Mar 23 10:49:53 equinoxa cimserver[2337]: PGS10026: The CIM server >> is listening >> on HTTPS port 5,989. >> Mar 23 10:49:53 equinoxa cimserver[2337]: PGS10028: The CIM server >> is listening >> on the local connection socket. >> Mar 23 10:49:53 equinoxa cimserver[2337]: PGS10030: Started HP-UX >> WBEM Services >> version A.02.05.08. >> Mar 23 10:49:56 equinoxa pwgrd: Started at Tue Mar 23 10:49:56 2010, >> pid = 2527 >> Mar 23 10:49:56 equinoxa diagmond[2583]: started >> Mar 23 10:49:56 equinoxa /usr/sbin/envd[2593]: restart, and read the >> configurati >> on file >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3034]: Setting STREAMS-HEAD >> high water v >> alue to 131072. >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3047]: nfsd do_one mpctl >> succeeded: ncpu >> s = 8. >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3047]: nfsd do_one pmap 2 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3047]: nfsd do_one pmap 3 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3049]: nfsd do_one bind 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3050]: nfsd do_one bind 1 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3052]: nfsd do_one bind 3 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3051]: nfsd do_one bind 2 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3053]: nfsd do_one bind 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3054]: nfsd do_one bind 5 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3047]: nfsd do_one bind 7 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3052]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3056]: nfsd do_one bind 6 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3052]: nfsd 3 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3057]: nfsd 3 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3047]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3047]: nfsd 7 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3058]: nfsd 7 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3050]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3049]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3051]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3056]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3050]: nfsd 1 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3049]: nfsd 0 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3051]: nfsd 2 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3056]: nfsd 6 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3062]: nfsd 6 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3053]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3059]: nfsd 1 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3054]: Return from >> t_optmgmt(XTI_DISTRIB >> UTE) 0 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3053]: nfsd 4 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3063]: nfsd 4 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3060]: nfsd 0 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3054]: nfsd 5 1 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3065]: nfsd 5 0 sock 4 >> Mar 23 10:50:01 equinoxa /usr/sbin/nfsd[3061]: nfsd 2 0 sock 4 >> Mar 23 10:50:02 equinoxa krsd[3207]: Delay time is 300 seconds >> Mar 23 10:51:22 equinoxa syslog: libtt[4373]: >> _Tt_session::client_session_init() >> : TT_ERR_ADDRESS >> Mar 23 10:51:23 equinoxa syslog: libtt[4383]: >> _Tt_session::client_session_init() >> : TT_ERR_ADDRESS >> Mar 23 10:53:26 equinoxa su: + te root-sybase >> Mar 23 12:21:57 equinoxa syslog: gethostbyaddr: >> hfsvmx001.housingfinance.co.ke. >> != 128.1.1.62 >> Mar 23 12:22:07 equinoxa syslog: gethostbyaddr: >> hfsvmx001.housingfinance.co.ke. >> != 128.1.1.62 >> Mar 23 12:29:02 equinoxa above message repeats 15 times >> Mar 23 12:33:51 equinoxa su: + tk root-sybase >> Mar 23 12:34:06 equinoxa su: + tk root-sybase >> Mar 23 13:20:52 equinoxa su: + te root-sybase >> Mar 23 14:01:52 equinoxa ftpd[11110]: Data port : 20 >> Mar 23 14:01:52 equinoxa ftpd[11110]: gethostbyaddr: >> hfvalomai.housingfinance.co >> .ke. != 128.1.1.176 >> Mar 23 14:01:52 equinoxa ftpd[11110]: FTP server (Revision 1.1 >> Version wuftpd-2. >> 6.1(PHNE_34698) Fri Nov 10 10:21:03 GMT 2006) ready. >> Mar 23 14:01:53 equinoxa ftpd[11110]: FTP LOGIN FROM 128.1.1.176 >> [128.1.1.176], >> root >> Mar 23 14:03:09 equinoxa ftpd[11110]: lost connection to 128.1.1.176 >> [128.1.1.17 >> 6] >> Mar 23 14:01:52 equinoxa ftpd[11110]: gethostbyaddr: >> hfvalomai.housingfinance.co >> .ke. != 128.1.1.176 >> Mar 23 14:03:09 equinoxa ftpd[11110]: FTP session closed >> Mar 23 14:03:26 equinoxa ftpd[11198]: Data port : 20 >> Mar 23 14:03:26 equinoxa ftpd[11198]: gethostbyaddr: >> hfvalomai.housingfinance.co >> .ke. != 128.1.1.176 >> Mar 23 14:03:26 equinoxa ftpd[11198]: FTP server (Revision 1.1 >> Version wuftpd-2. >> 6.1(PHNE_34698) Fri Nov 10 10:21:03 GMT 2006) ready. >> Mar 23 14:03:26 equinoxa ftpd[11198]: FTP LOGIN FROM 128.1.1.176 >> [128.1.1.176], >> root >> Mar 23 14:03:26 equinoxa ftpd[11198]: gethostbyaddr: >> hfvalomai.housingfinance.co >> .ke. != 128.1.1.176 >> Mar 23 14:21:49 equinoxa ftpd[11198]: User root timed out after 900 >> seconds at T >> ue Mar 23 14:21:49 2010 >> Mar 23 14:21:49 equinoxa ftpd[11198]: FTP session closed >> >> thanks >> >> >> >> >> >> >> On Tue, Mar 23, 2010 at 2:26 PM, Haggai Nyang < >> haggai.nyang@gmail.com> wrote: >> >>> Just saw you mentioned up there that you're on HP-UX...that would >>> be /var/adm/syslog/syslog.log >>> >>> On Tue, Mar 23, 2010 at 2:22 PM, Benjamin <anangwe@gmail.com>wrote: >>> >>>> mostly hardware! >>>> >>>> >>>> else try these i hope it works >>>> >>>> >>>> In order to correct this error, try to eliminate the *lasterror*first, as this might be one of the causes for this error (except when >>>> *lasterror* is 0). >>>> >>>> Also, try rerunning the command referenced in the SQL causing >>>> error to see if the problem reoccurs. >>>> >>>> If the process is infected with 11 and the problem can be >>>> reproduced, try and correct it as follows: >>>> >>>> 1. >>>> >>>> If the SQL causing error is a compiled object such as a stored >>>> procedure, trigger, or view, drop and recreate the object. >>>> 2. >>>> >>>> If the SQL causing error is ad hoc rather than a compiled >>>> object, moving the data may fix the problem. Use one of these options: >>>> - >>>> >>>> Select the table data into a new table, drop the old table, >>>> and rename the new table to the old table name. >>>> - >>>> >>>> Bulk copy the affected table out, drop and re-create the >>>> table, and bulk copy back in. This is the most efficient solution for a very >>>> large table. >>>> >>>> If moving the data corrects the problem, the data may have >>>> been corrupt. Be aware that moving corrupted data can lead to a data loss. >>>> >>>> Check your hardware error log as this error can be caused by >>>> hardware failure as well. >>>> >>>> _______________________________________________ >>>> Skunkworks mailing list >>>> Skunkworks@lists.my.co.ke >>>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>>> ------------ >>>> Skunkworks Server donations spreadsheet >>>> >>>> http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... >>>> ------------ >>>> Skunkworks Rules >>>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>>> ------------ >>>> Other services @ http://my.co.ke >>>> >>> >>> >>> _______________________________________________ >>> Skunkworks mailing list >>> Skunkworks@lists.my.co.ke >>> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >>> ------------ >>> Skunkworks Server donations spreadsheet >>> >>> http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... >>> ------------ >>> Skunkworks Rules >>> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >>> ------------ >>> Other services @ http://my.co.ke >>> >> >> >> >> -- >> >> >> Best regards >> Esther Wambugu >> >> >> _______________________________________________ >> Skunkworks mailing list >> Skunkworks@lists.my.co.ke >> http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks >> ------------ >> Skunkworks Server donations spreadsheet >> >> http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... >> ------------ >> Skunkworks Rules >> http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 >> ------------ >> Other services @ http://my.co.ke >> > >
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Server donations spreadsheet
http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
--
Best regards Esther Wambugu
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Server donations spreadsheet
http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Server donations spreadsheet
http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
--
Best regards Esther Wambugu
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Server donations spreadsheet
http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Server donations spreadsheet
http://spreadsheets.google.com/ccc?key=0AopdHkqSqKL-dHlQVTMxU1VBdU1BSWJxdy1f... ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
--
Best regards Esther Wambugu
-- Best regards Esther Wambugu