[ 0.442291] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.442473] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.444418] brd: module loaded [ 0.445294] loop: module loaded [ 0.445663] ata_piix 0000:00:1f.1: version 2.13 [ 0.445682] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.445695] alloc irq_desc for 18 on node -1 [ 0.445699] alloc kstat_irqs on node -1 [ 0.445711] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.445786] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.445956] scsi0 : ata_piix [ 0.446118] scsi1 : ata_piix [ 0.446193] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14 [ 0.446197] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15 [ 0.446872] Fixed MDIO Bus: probed [ 0.446933] PPP generic driver version 2.4.2 [ 0.447037] tun: Universal TUN/TAP device driver, 1.6 [ 0.447040] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.447185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.447220] alloc irq_desc for 23 on node -1 [ 0.447224] alloc kstat_irqs on node -1 [ 0.447235] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.447263] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.447268] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.447327] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.447370] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.451257] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.451284] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0500000 [ 0.465551] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.465755] hub 1-0:1.0: USB hub found [ 0.465764] hub 1-0:1.0: 6 ports detected [ 0.465889] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.465916] uhci_hcd: USB Universal Host Controller Interface driver [ 0.465983] alloc irq_desc for 16 on node -1 [ 0.465986] alloc kstat_irqs on node -1 [ 0.465996] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.466009] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.466014] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.466075] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.466116] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440 [ 0.466309] hub 2-0:1.0: USB hub found [ 0.466319] hub 2-0:1.0: 2 ports detected [ 0.466413] alloc irq_desc for 19 on node -1 [ 0.466417] alloc kstat_irqs on node -1 [ 0.466424] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.466434] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.466439] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.466496] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.466534] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460 [ 0.466733] hub 3-0:1.0: USB hub found [ 0.466739] hub 3-0:1.0: 2 ports detected [ 0.466935] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.469943] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.469964] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.470090] mice: PS/2 mouse device common for all mice [ 0.470263] rtc_cmos 00:03: RTC can wake from S4 [ 0.470337] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.470365] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.470554] device-mapper: uevent: version 1.0.3 [ 0.470776] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.470988] device-mapper: multipath: version 1.1.1 loaded [ 0.470995] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.471200] EISA: Probing bus 0 at eisa.0 [ 0.471211] Cannot allocate resource for EISA slot 1 [ 0.471215] Cannot allocate resource for EISA slot 2 [ 0.471246] EISA: Detected 0 cards. [ 0.471561] cpuidle: using governor ladder [ 0.471567] cpuidle: using governor menu [ 0.472177] TCP cubic registered [ 0.472383] NET: Registered protocol family 10 [ 0.473055] lo: Disabled Privacy Extensions [ 0.473514] NET: Registered protocol family 17 [ 0.473644] Using IPI No-Shortcut mode [ 0.473825] PM: Resume from disk failed. [ 0.473846] registered taskstats version 1 [ 0.474133] Magic number: 14:362:627 [ 0.474240] rtc_cmos 00:03: setting system clock to 2010-10-24 09:38:54 UTC (1287913134) [ 0.474245] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.474248] EDD information not available. [ 0.493768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.621794] ata1.00: ATAPI: ATAPI CD-RW 52X24, F.JZ, max UDMA/33 [ 0.621851] ata1.01: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100 [ 0.621856] ata1.01: 78165360 sectors, multi 16: LBA [ 0.621894] ata1.01: limited to UDMA/33 due to 40-wire cable [ 0.630130] ata2.01: ATA-7: SAMSUNG SP0822N, WA100-31, max UDMA/100 [ 0.630136] ata2.01: 156368016 sectors, multi 16: LBA48 [ 0.630172] ata2.01: limited to UDMA/33 due to 40-wire cable [ 0.637842] ata1.00: configured for UDMA/33 [ 0.645906] ata1.01: configured for UDMA/33 [ 0.646172] ata2.01: configured for UDMA/33 [ 0.722338] Freeing initrd memory: 10728k freed [ 0.795452] isapnp: No Plug & Play device found [ 0.796199] scsi 0:0:0:0: CD-ROM ATAPI CD-RW 52X24 F.JZ PQ: 0 ANSI: 5 [ 0.799126] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 0.799132] Uniform CD-ROM driver Revision: 3.20 [ 0.799312] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.799417] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.799639] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5 [ 0.799850] sd 0:0:1:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.799863] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.799956] sd 0:0:1:0: [sda] Write Protect is off [ 0.799963] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 0.800023] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.800086] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP0822N WA10 PQ: 0 ANSI: 5 [ 0.800365] sd 1:0:1:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.800415] sda: [ 0.800430] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 0.800531] sd 1:0:1:0: [sdb] Write Protect is off [ 0.800538] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.800594] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.800915] sdb: sda1 sda2 < sdb1 sdb2 < sda5 sda6 > [ 0.830796] sd 0:0:1:0: [sda] Attached SCSI disk [ 0.831449] sdb5 > [ 0.831990] sd 1:0:1:0: [sdb] Attached SCSI disk [ 0.832017] Freeing unused kernel memory: 684k freed [ 0.832821] Write protecting the kernel text: 4932k [ 0.832907] Write protecting the kernel read-only data: 1976k [ 0.867221] udev[103]: starting version 163 [ 0.953348] xor: automatically using best checksumming function: pIII_sse [ 0.969470] pIII_sse : 2343.000 MB/sec [ 0.969484] xor: using function: pIII_sse (2343.000 MB/sec) [ 1.028479] tg3.c:v3.110 (April 9, 2010) [ 1.028523] alloc irq_desc for 21 on node -1 [ 1.028528] alloc kstat_irqs on node -1 [ 1.028548] tg3 0000:05:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.032602] device-mapper: dm-raid45: initialized v0.2594b [ 1.060809] FDC 0 is a post-1991 82077 [ 1.079400] tg3 0000:05:02.0: eth0: Tigon3 [partno(BCM95702A20) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0e:7f:ae:a3:c9 [ 1.079410] tg3 0000:05:02.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.079417] tg3 0000:05:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.079423] tg3 0000:05:02.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 1.079568] aic79xx 0000:05:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.342508] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem [ 1.342517] EXT4-fs (sdb1): write access will be enabled during recovery [ 3.207239] EXT4-fs (sdb1): orphan cleanup on readonly fs [ 3.207255] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 85 [ 3.207304] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 84 [ 3.207323] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 79 [ 3.207342] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 72 [ 3.207360] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 60 [ 3.207377] EXT4-fs (sdb1): 5 orphan inodes deleted [ 3.207383] EXT4-fs (sdb1): recovery complete [ 3.549023] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 6.308042] scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 6.308045] <Adaptec AIC7902 Ultra320 SCSI adapter> [ 6.308046] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66MHz, 512 SCBs [ 6.308361] alloc irq_desc for 22 on node -1 [ 6.308366] alloc kstat_irqs on node -1 [ 6.308381] aic79xx 0000:05:0c.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 11.532037] scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 11.532040] <Adaptec AIC7902 Ultra320 SCSI adapter> [ 11.532042] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66MHz, 512 SCBs [ 22.381784] udev[331]: starting version 163 [ 22.411428] lp: driver loaded but no devices found [ 22.431773] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.515529] intel_rng: Firmware space is locked read-only. If you can't or [ 22.515537] intel_rng: don't want to disable this in firmware setup, and if [ 22.515541] intel_rng: you are certain that your system has a functional [ 22.515547] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 22.530888] Adding 3004116k swap on /dev/sdb5. Priority:-1 extents:1 across:3004116k [ 22.598370] Linux agpgart interface v0.103 [ 22.694221] agpgart-intel 0000:00:00.0: Intel E7505 Chipset [ 22.751610] IR NEC protocol handler initialized [ 22.772867] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 22.774143] IR RC5(x) protocol handler initialized [ 22.792262] parport_pc 00:07: reported by Plug and Play ACPI [ 22.792336] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 22.818325] Linux video capture interface: v2.00 [ 22.836648] EDAC MC: Ver: 2.1.0 Oct 16 2010 [ 22.840130] IR RC6 protocol handler initialized [ 22.862199] type=1400 audit(1287902356.882:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=529 comm="apparmor_parser" [ 22.863090] type=1400 audit(1287902356.882:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=529 comm="apparmor_parser" [ 22.863618] type=1400 audit(1287902356.882:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=529 comm="apparmor_parser" [ 22.866630] IR JVC protocol handler initialized [ 22.879315] type=1400 audit(1287902356.898:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=544 comm="apparmor_parser" [ 22.880335] lp0: using parport0 (interrupt-driven). [ 22.891029] psmouse serio1: ID: 10 00 64 [ 22.891632] ppdev: user-space parallel port driver [ 22.904602] IR Sony protocol handler initialized [ 22.948753] saa7130/34: v4l2 driver version 0.2.16 loaded [ 22.948893] saa7134 0000:05:0d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 22.948913] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 22.948929] saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV Stereo (saa7134) [card=26,insmod option] [ 22.948974] saa7130[0]: board init: gpio is 60cd00 [ 22.949993] lirc_dev: IR Remote Control driver registered, major 251 [ 22.954830] IR LIRC bridge handler initialized [ 22.955228] nvidia: module license 'NVIDIA' taints kernel. [ 22.955235] Disabling lock debugging due to kernel taint [ 23.002426] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 23.063085] saa7130[0]: Huh, no eeprom present (err=-5)? [ 23.106942] alloc irq_desc for 17 on node -1 [ 23.106950] alloc kstat_irqs on node -1 [ 23.106967] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 23.107044] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 23.120050] All bytes are equal. It is not a TEA5767 [ 23.120384] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 23.140065] mt20xx 0-0060: microtune: companycode=7474 part=74 rev=74 [ 23.140075] mt20xx 0-0060: microtune unknown found, not (yet?) supported, sorry :-/ [ 23.140366] tuner 0-0060: Tuner has no way to set tv freq [ 23.140373] tuner 0-0060: Tuner has no way to set tv freq [ 23.140666] saa7130[0]: registered device video0 [v4l2] [ 23.140735] saa7130[0]: registered device vbi0 [ 23.163082] saa7134 ALSA driver for DMA sound loaded [ 23.163093] saa7130[0]/alsa: Pinnacle PCTV Stereo (saa7134) doesn't support digital audio [ 23.174577] tuner 0-0060: Tuner has no way to set tv freq [ 23.175455] tuner 0-0060: Tuner has no way to set tv freq [ 23.331512] type=1400 audit(1287902357.350:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=777 comm="apparmor_parser" [ 23.332299] type=1400 audit(1287902357.354:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=777 comm="apparmor_parser" [ 23.336052] type=1400 audit(1287902357.358:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=777 comm="apparmor_parser" [ 23.347213] type=1400 audit(1287902357.366:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=781 comm="apparmor_parser" [ 23.347626] type=1400 audit(1287902357.366:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=778 comm="apparmor_parser" [ 23.348329] type=1400 audit(1287902357.370:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=781 comm="apparmor_parser" [ 23.480027] intel8x0_measure_ac97_clock: measured 55391 usecs (2669 samples) [ 23.480034] intel8x0: clocking to 48000 [ 23.711780] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.036663] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 24.270351] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 24.270359] vboxdrv: Successfully done. [ 24.270364] vboxdrv: Found 4 processor cores. [ 24.271349] vboxdrv: fAsync=0 offMin=0x7a0 offMax=0x3d84 [ 24.273786] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.273804] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001). [ 24.492675] NVRM: The NVIDIA Quadro2 MXR/EX/Go GPU installed in this system is [ 24.492681] NVRM: supported through the NVIDIA 96.43.xx Legacy drivers. Please [ 24.492684] NVRM: visit http://www.nvidia.com/object/unix.html for more [ 24.492686] NVRM: information. The 260.19.06 NVIDIA driver will ignore [ 24.492688] NVRM: this GPU. Continuing probe... [ 24.492708] NVRM: No NVIDIA graphics adapter found! [ 25.312140] tg3 0000:05:02.0: eth0: Link is up at 100 Mbps, full duplex [ 25.312145] tg3 0000:05:02.0: eth0: Flow control is off for TX and off for RX [ 25.312323] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.008320] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 32.438708] tuner 0-0060: Tuner has no way to set tv freq [ 33.003375] tuner 0-0060: Tuner has no way to set tv freq [ 35.456016] eth0: no IPv6 routers present [ 40.226695] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 52.862902] cdrom: failed setting lba address space [ 52.913839] cdrom: failed setting lba address space [ 53.098652] UDF-fs: Partition marked readonly; forcing readonly mount [ 53.116461] UDF-fs INFO UDF: Mounting volume 'Alice & Collins', timestamp 2009/03/11 02:21 (10b4) [ 90.326624] lo: Disabled Privacy Extensions [ 225.962212] saa7134 ALSA driver for DMA sound unloaded [ 251.361232] saa7130/34: v4l2 driver version 0.2.16 loaded [ 251.361318] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 251.361332] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyDVB-T / Genius VideoWonder DVB-T [card=86,insmod option] [ 251.361377] saa7130[0]: board init: gpio is 60cd00 [ 251.424023] Registered IR keymap rc-flydvb [ 251.424226] input: saa7134 IR (LifeView FlyDVB-T / as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0/input4 [ 251.424386] rc0: saa7134 IR (LifeView FlyDVB-T / as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0 [ 251.529765] saa7130[0]: Huh, no eeprom present (err=-5)? [ 251.548026] All bytes are equal. It is not a TEA5767 [ 251.548200] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 251.565523] tuner-simple 0-0060: creating new instance [ 251.565530] tuner-simple 0-0060: type set to 81 (Partsnic (Daewoo) PTI-5NF05) [ 251.573691] saa7130[0]: registered device video0 [v4l2] [ 251.573750] saa7130[0]: registered device vbi0 [ 251.591765] saa7134 ALSA driver for DMA sound loaded [ 251.591774] saa7130[0]/alsa: LifeView FlyDVB-T / Genius VideoWonder DVB-T doesn't support digital audio [ 251.642564] dvb_init() allocating 1 frontend [ 251.667849] tda10046: chip is not answering. Giving up. [ 325.642358] saa7134 ALSA driver for DMA sound unloaded [ 341.465717] tuner-simple 0-0060: destroying instance [ 361.632118] saa7130/34: v4l2 driver version 0.2.16 loaded [ 361.632205] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 361.632218] saa7130[0]: subsystem: 1131:0000, board: Philips Tiger reference design [card=81,insmod option] [ 361.632284] saa7130[0]: board init: gpio is 60cd00 [ 361.736300] saa7130[0]: Huh, no eeprom present (err=-5)? [ 361.752023] All bytes are equal. It is not a TEA5767 [ 361.752205] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 361.760019] tuner-simple 0-0060: creating new instance [ 361.760025] tuner-simple 0-0060: type set to 23 (Philips PAL_DK (FI1256 and compatibles)) [ 361.784234] saa7130[0]: registered device video0 [v4l2] [ 361.784336] saa7130[0]: registered device vbi0 [ 361.784430] saa7130[0]: registered device radio0 [ 361.792133] dvb_init() allocating 1 frontend [ 361.799889] saa7134 ALSA driver for DMA sound loaded [ 361.799900] saa7130[0]/alsa: Philips Tiger reference design doesn't support digital audio [ 361.816685] tda10046: chip is not answering. Giving up. [ 403.598885] saa7134 ALSA driver for DMA sound unloaded [ 414.773970] tuner-simple 0-0060: destroying instance [ 424.238859] saa7130/34: v4l2 driver version 0.2.16 loaded [ 424.238947] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 424.238960] saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV Stereo (saa7134) [card=26,insmod option] [ 424.239027] saa7130[0]: board init: gpio is 40cd00 [ 424.340272] saa7130[0]: Huh, no eeprom present (err=-5)? [ 424.361032] All bytes are equal. It is not a TEA5767 [ 424.361212] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 424.377019] mt20xx 0-0060: microtune: companycode=3232 part=32 rev=32 [ 424.377024] mt20xx 0-0060: microtune unknown found, not (yet?) supported, sorry :-/ [ 424.377194] tuner 0-0060: Tuner has no way to set tv freq [ 424.377199] tuner 0-0060: Tuner has no way to set tv freq [ 424.377370] saa7130[0]: registered device video0 [v4l2] [ 424.377455] saa7130[0]: registered device vbi0 [ 424.381215] tuner 0-0060: Tuner has no way to set tv freq [ 424.381477] tuner 0-0060: Tuner has no way to set tv freq [ 424.391555] saa7134 ALSA driver for DMA sound loaded [ 424.391564] saa7130[0]/alsa: Pinnacle PCTV Stereo (saa7134) doesn't support digital audio [ 430.499894] tuner 0-0060: Tuner has no way to set tv freq [ 430.499942] tuner 0-0060: Tuner has no way to set tv freq [ 430.499957] tuner 0-0060: Tuner has no way to set tv freq [ 430.578457] tuner 0-0060: Tuner has no way to set tv freq [ 430.578484] tuner 0-0060: Tuner has no way to set tv freq [ 430.658469] tuner 0-0060: Tuner has no way to set tv freq [ 440.147855] tuner 0-0060: Tuner has no way to set tv freq [ 445.633710] tuner 0-0060: Tuner has no way to set tv freq [ 996.540202] tuner 0-0060: Tuner has no way to set tv freq [ 1177.059639] saa7134 ALSA driver for DMA sound unloaded [ 1236.733860] saa7130/34: v4l2 driver version 0.2.16 loaded [ 1236.733944] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 1236.733964] saa7130[0]: subsystem: 1131:0000, board: V-Stream Studio TV Terminator [card=65,insmod option] [ 1236.734071] saa7130[0]: board init: gpio is 40cd00 [ 1236.772027] Registered IR keymap rc-pixelview [ 1236.772268] input: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0/input5 [ 1236.772500] rc0: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0 [ 1236.876327] saa7130[0]: Huh, no eeprom present (err=-5)? [ 1236.896021] All bytes are equal. It is not a TEA5767 [ 1236.896197] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 1236.936013] tda8290: no gate control were provided! [ 1236.936171] tuner 0-0060: Tuner has no way to set tv freq [ 1236.936177] tuner 0-0060: Tuner has no way to set tv freq [ 1236.936345] saa7130[0]: registered device video0 [v4l2] [ 1236.936433] saa7130[0]: registered device vbi0 [ 1236.936530] saa7130[0]: registered device radio0 [ 1236.941857] tuner 0-0060: Tuner has no way to set tv freq [ 1236.955542] saa7134 ALSA driver for DMA sound loaded [ 1236.955559] saa7130[0]/alsa: V-Stream Studio TV Terminator doesn't support digital audio [ 1291.653992] saa7134 ALSA driver for DMA sound unloaded [ 1320.051946] saa7130/34: v4l2 driver version 0.2.16 loaded [ 1320.052030] saa7130[0]: found at 0000:05:0d.0, rev: 1, irq: 22, latency: 66, mmio: 0xe0414000 [ 1320.052044] saa7130[0]: subsystem: 1131:0000, board: V-Stream Studio TV Terminator [card=65,insmod option] [ 1320.052125] saa7130[0]: board init: gpio is 40cd00 [ 1320.052143] Registered IR keymap rc-pixelview [ 1320.053362] input: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0/input6 [ 1320.054124] rc0: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:1e.0/0000:05:0d.0/rc/rc0 [ 1320.156296] saa7130[0]: Huh, no eeprom present (err=-5)? [ 1320.173022] All bytes are equal. It is not a TEA5767 [ 1320.173203] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 1320.204022] tda8290: no gate control were provided! [ 1320.204189] tuner 0-0060: Tuner has no way to set tv freq [ 1320.204195] tuner 0-0060: Tuner has no way to set tv freq [ 1320.204362] saa7130[0]: registered device video0 [v4l2] [ 1320.204447] saa7130[0]: registered device vbi0 [ 1320.204562] saa7130[0]: registered device radio0 [ 1320.228415] saa7134 ALSA driver for DMA sound loaded [ 1320.228430] saa7130[0]/alsa: V-Stream Studio TV Terminator doesn't support digital audio [12235.784572] device eth0 entered promiscuous mode [12870.499943] device eth0 left promiscuous mode [20209.401399] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [20304.583378] ata1: drained 2048 bytes to clear DRQ. [20304.583388] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [20304.583395] sr 0:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [20304.583422] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [20304.583423] res 58/00:02:00:00:08/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [20304.583428] ata1.00: status: { DRDY DRQ } [20304.636026] ata1: soft resetting link [20304.825314] ata1.00: configured for UDMA/33 [20304.833221] ata1.01: configured for UDMA/33 [20304.843062] ata1: EH complete [85680.510073] lo: Disabled Privacy Extensions [137846.976019] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137853.696023] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137867.136021] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137893.984468] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057185759:2057195839 (repaired) [137966.625517] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057207095:2057210239 (repaired) [137981.345530] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057207095:2057210239 (repaired) [138010.785516] TCP: Peer 86.67.189.200:43432/48587 unexpectedly shrunk window 2057207095:2057210239 (repaired) [138098.252814] show_signal_msg: 24 callbacks suppressed [138098.252829] transmission[5542]: segfault at 702f3035 ip 00269ddf sp bfba7860 error 4 in libgobject-2.0.so.0.2600.0[23d000+40000] [141850.777993] nautilus[1846]: segfault at 6 ip 0059aef8 sp bfc83440 error 4 in libglib-2.0.so.0.2600.0[560000+cd000] [157022.160017] TCP: Peer 112.202.164.188:18156/42298 unexpectedly shrunk window 3322421676:3322428936 (repaired) [164078.347086] ata1: drained 2048 bytes to clear DRQ. [164078.347123] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [164078.347132] sr 0:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [164078.347170] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [164078.347173] res 58/00:02:00:00:08/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [164078.347180] ata1.00: status: { DRDY DRQ } [164078.404028] ata1: soft resetting link [164078.588566] ata1.00: configured for UDMA/33 [164078.602503] ata1.01: configured for UDMA/33 [164078.610947] ata1: EH complete [165835.620029] usb 3-1: new full speed USB device using uhci_hcd and address 2 [165837.114809] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [165837.118437] usbcore: registered new interface driver cdc_acm [165837.118468] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [168809.304069] usb 3-1: USB disconnect, address 2 [168894.212031] usb 3-1: new full speed USB device using uhci_hcd and address 3 [168894.425068] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [171825.730043] usb 3-1: USB disconnect, address 3 [177010.120030] TCP: Peer 195.94.220.42:13544/51079 unexpectedly shrunk window 2746373574:2746373579 (repaired) [177016.129516] TCP: Peer 195.94.220.42:13544/51079 unexpectedly shrunk window 2746373574:2746373579 (repaired) [177028.160026] TCP: Peer 195.94.220.42:13544/51079 unexpectedly shrunk window 2746373574:2746373579 (repaired) [179193.656023] usb 3-1: new full speed USB device using uhci_hcd and address 4 [179193.867078] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [180053.376055] usb 3-1: USB disconnect, address 4 [180912.345056] usb 3-1: new full speed USB device using uhci_hcd and address 5 [180912.557421] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [181022.064065] usb 3-1: USB disconnect, address 5 [181188.228033] usb 3-1: new full speed USB device using uhci_hcd and address 6 [181188.441193] cdc_acm 3-1:2.1: ttyACM0: USB ACM device [181377.068046] usb 1-4: new high speed USB device using ehci_hcd and address 3 [181377.385904] Initializing USB Mass Storage driver... [181377.386212] scsi4 : usb-storage 1-4:1.0 [181377.386852] usbcore: registered new interface driver usb-storage [181377.386863] USB Mass Storage support registered. [181378.416905] scsi 4:0:0:0: Direct-Access Kingston DataTraveler C10 PMAP PQ: 0 ANSI: 0 CCS [181378.420022] sd 4:0:0:0: Attached scsi generic sg3 type 0 [181379.560474] sd 4:0:0:0: [sdc] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB) [181379.562840] sd 4:0:0:0: [sdc] Write Protect is off [181379.562845] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00 [181379.562850] sd 4:0:0:0: [sdc] Assuming drive cache: write through [181379.567837] sd 4:0:0:0: [sdc] Assuming drive cache: write through [181379.567851] sdc: sdc1 [181379.598128] sd 4:0:0:0: [sdc] Assuming drive cache: write through [181379.598138] sd 4:0:0:0: [sdc] Attached SCSI removable disk