On Mon, Oct 25, 2010 at 1:14 PM, [ Brainiac ] <arebacollins@gmail.com>wrote:
im imagining that the DVB card is used in place of a Decoder fr F2A channels.... right ?
On Mon, Oct 25, 2010 at 11:43 AM, Mark Mwangi <mwangy@gmail.com> wrote:
@ brian where can I get the dvb usb dongle? are they available locally?
On Mon, Oct 25, 2010 at 11:27 AM, Ndungi Kyalo <ndungi@gmail.com> wrote:
Hi Brian,
Just out of curiosity, what channels (in Kenya) do you currently get to watch with a DVB card ? And which areas are covered in and around Nairobi ?
On 25 October 2010 07:49, Brian L <lusiola@gmail.com> wrote:
On Mon, Oct 25, 2010 at 10:10 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
Good morning Brian,
Am yet to try out any DVB-x card, I have dwelt entirely in the saa713x / bttv realm. That said, I see there are no complaints in your dmesg output so I assume the card driver was setup ok, and it might only be a reception/antennae problem (as is generally common with any other usb tv cards). Unless your card was wrongly detected i.e it is not an Afatech DVB-T card ?
On 25 October 2010 06:23, Brian L <lusiola@gmail.com> wrote:
<Hijack> Goodmorning Ndungi, I have a DTV usb dongle. Here is my dmesg output
[103982.672165] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [103982.672522] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input12 [103982.672605] generic-usb 0003:15A4:9016.0002: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3/input1 [103983.008382] AF901X: af901x_module_init [103984.202114] dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state. [103984.202858] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [103984.203460] DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier) [103984.203735] DVB: registering adapter 0 frontend 0 (AF901X USB DVB-T)... [103984.207936] dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and connected. [103984.207975] usbcore: registered new interface driver dvb_usb_af901x
I haveAm trying to scan for channels using w-scan without any success
On Sun, Oct 24, 2010 at 7:16 AM, Ndungi Kyalo <ndungi@gmail.com>wrote:
> Try rmmod-ing saa7134 _alsa too, or any other dependent module until > rmmod saa7134 succeeds silently. Only then can you say you've reloaded the > driver with the correct options. Also fungua alsa-mixer and raise the line > and 3d volume just to b sure.. all the best! > > On Oct 24, 2010 12:23 AM, "[ Brainiac ]" <arebacollins@gmail.com> > wrote: > > nothing seems to work after the first two: in fact tvtime now just > flickers on and then goes... > > areba@areba-desktop:~$ rmmod saa7134 >> ERROR: Module saa7134 is in use by saa7134_alsa >> areba@areba-desktop:~$ sudo rmmod saa7134 >> [sudo] password for areba: >> ERROR: Module saa7134 is in use by saa7134_alsa >> areba@areba-desktop:~$ modprobe saa7134 card=86 tuner=81 >> WARNING: All config files need .conf: /etc/modprobe.d/options, it >> will be ignored in a future release. >> areba@areba-desktop:~$ tvtime >> Running tvtime 1.0.2. >> Reading configuration from /etc/tvtime/tvtime.xml >> I/O warning : failed to load external entity >> "/home/areba/.tvtime/tvtime.xml" >> I/O error : Permission denied >> I/O error : Permission denied >> Cannot change owner of /home/areba/.tvtime/tvtime.xml: Permission >> denied. >> cpuinfo: CPU Intel(R) Xeon(TM) CPU 2.66GHz, family 15, model 2, >> stepping 9. >> cpuinfo: CPU measured at 2658.094MHz. >> tvtime: Cannot set priority to -10: Permission denied. >> xcommon: Display :1.0, vendor The X.Org Foundation, vendor release >> 10900000 >> xfullscreen: Using XINERAMA for dual-head information. >> xfullscreen: Pixels are square. >> xfullscreen: Number of displays is 1. >> xfullscreen: Head 0 at 0,0 with size 1024x768. >> xcommon: Have XTest, will use it to ping the screensaver. >> >> > > on the mplayer, i installed and ran as indicated. I got video all > right (citizen actually), but no sound. > > > > > > On Sat, Oct 23, 2010 at 11:51 PM, Ndungi Kyalo <ndungi@gmail.com> > wrote: > > > > Connect the tv audio o... > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke > > > _______________________________________________ > Skunkworks mailing list > Skunkworks@lists.my.co.ke > http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks > ------------ > Skunkworks Rules > http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 > ------------ > Other services @ http://my.co.ke >
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
Ndungi The card is correct, so are the drivers. The next step after having the drivers installed is to scan the channels. This is where *w_scan* comes in, or what I have been trying to use. It is meant to create a channel-list.conf that I am supposed to use with vlc, all I get is 0 services. Kaffeine comes with its own scan ap but doesn't seem to be working for me. I have tried from different locations within Nairobi, so I really don't think its signal issue, plus besides it works well on windoze. Anybody with experience in this. I would like to know where I am going wrong as I have followed so many threads from Google University. Thank you in advance.
Kind regards,
-- Lusiola Brian |3 R 1 /-\ |\|
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Mark Mwangi
Skype : mark.mwangy
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
-- Regards,
Collins Areba.
*Strategic Operations. * *Center for Renewable Alternatives* Old Ferry Road, off Msa Malindi Rd, | Kilifi, Kenya. +254 720 516758 /734 696821 | skype/gtalk/twitter: arebacollins **
_______________________________________________ Skunkworks mailing list Skunkworks@lists.my.co.ke http://lists.my.co.ke/cgi-bin/mailman/listinfo/skunkworks ------------ Skunkworks Rules http://my.co.ke/phpbb/viewtopic.php?f=24&t=94 ------------ Other services @ http://my.co.ke
@ Mark. I got mine through unified-concepts <http://www.unified-concepts.co.ke>. Please contact them as I am not sure on what they have in stock. @Ndungi I don't have the channel list of my own memory, I had to remove Micro$oft, I can get you a full channel list that is available later. @Brainiac Nime float. ??? [?] Hiyo ni nini? All I have is a DVB-T usb receiver. Trying to do some research for work :D -- Lusiola Brian |3 R 1 /-\ |\|
